
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Build a compact DIY MOSFET motor driver PCB from scratch! Perfect for Arduino, robotics and electronics projects.
Tiny MOSFET Motor Driver is an open-source printed circuit board by DarshanSagar0, from the DarshanSagar0/Tiny-MOSFET-Motor-Driver repository on GitHub. It is a 2-layer board of 27 × 21 mm with 21 parts on 10 nets, routed with 125 tracks and 0 vias.
It is built around the 1N4148W and SI2356DS-T1-GE3(ES). Its parts include 9 connectors, 4 resistors and 4 diodes. It belongs with the robots and motor control boards of this library.
Build a compact DIY MOSFET motor driver PCB from scratch! Perfect for Arduino, robotics and electronics projects.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J4, J5, J8, J9 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | Conn_01x01_Female | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J2, J3, J6, J7 |
| 4 | SI2356DS-T1-GE3 | Package_TO_SOT_SMD:SOT-23 | T1, T2, T3, T4 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 27 × 21 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the 1N4148W and SI2356DS-T1-GE3(ES). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DarshanSagar0/Tiny-MOSFET-Motor-Driver repository on GitHub, at the commit this page was made from: the board is Tiny-MOSFET-Motor-Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DarshanSagar0 before reusing the design.