

SkateLightMainBoard
- Size
- 45 × 63.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 94
- Pads
- 411
- Tracks, vias
- 1,097, 272
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2022
- Updated
- 13 Mar 2022
Overview
SkateLightMainBoard is an open-source printed circuit board by dannyandreev, from the dannyandreev/BOM-Lights repository on GitHub, published under the AGPL-3.0 licence. It is a 4-layer board of 45 × 63.8 mm with 103 parts on 94 nets, routed with 1,097 tracks and 272 vias.
It is built around the MAXM15062AMB+, AP2139AK-3.3TRG1 and MCP2515T-I/SO-HX, with the FDMA410NZ and ECS-80-18-30B-AGN-TR among its other parts. Its parts include 37 resistors, 29 capacitors, 11 diodes, 9 ICs and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5MAXM15062AMB+
EMGA-10(2.6x3)-40℃~+125℃ 1 1.5mm 2.6mm 3.3V 300mA 3mm 4.5V~60V 500kHz 95uA Short Circuit Protection、Overheat Protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Light load efficient mode Step-down type ±1.5% EMGA-10(2.6x3) DC-DC Power Modules ROHSMaxim Integrated (Analog Devices)DC-DC Power ModulesAP2139AK-3.3TRG1
SOT-23-5-40℃~+85℃@(Ta) 1 1uA 250mA 3.3V 400mV@(250mA) 6V Enable Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMCP2515T-I/SO-HX
SOP-18SOP-18 CAN Controllers ROHSZHHXDZCAN ControllersFDMA410NZ
VDFN-6(2x2)-55℃~+150℃ 1 N-channel 1.08nF 130pF 14nC@4.5V 1V 2.4W 20V 23mΩ@4.5V 9.5A VDFN-6(2x2) MOSFETs ROHSonsemiMOSFETsECS-80-18-30B-AGN-TR
SMD5032-4PCrystalsECS
README
README.mdBOM-Lights
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF 25V | Capacitor_SMD:C_0805_2012Metric | C2, C16, C17, C18, C19, C20, C25 |
| 6 | 10k 5% | Resistor_SMD:R_0805_2012Metric | R7, R12, R16, R21, R25, R29 |
| 5 | 0.1uF 100V | Capacitor_SMD:C_0805_2012Metric | C8, C9, C11, C14, C22 |
| 4 | 10uF 16V | Capacitor_SMD:C_0805_2012Metric | C1, C3, C23, C24 |
| 4 | 1uF 25V | Capacitor_SMD:C_0805_2012Metric | C4, C13, C21, C29 |
| 4 | 330 5% | Resistor_SMD:R_0805_2012Metric | R26, R27, R28, R37 |
| 4 | 3k3 5% | Resistor_SMD:R_0805_2012Metric | R3, R31, R33, R35 |
| 4 | LEDO | LED_SMD:LED_0805_2012Metric | D2, D3, D8, D9 |
| 3 | 10uF 100V | Capacitor_SMD:C_1210_3225Metric | C7, C15, C28 |
| 3 | 2k2 5% | Resistor_SMD:R_0805_2012Metric | R30, R32, R34 |
| 3 | D_Schottky_AAK | Package_TO_SOT_SMD:TO-277A | D1, D4, D5 |
| 3 | FDMA410NZ | FDMA410NZ:FDMA410NZ | Q3, Q4, Q5 |
| 2 | 100k 5% | Resistor_SMD:R_0805_2012Metric | R18, R20 |
| 2 | 2.2nF 100V | Capacitor_SMD:C_0805_2012Metric | C10, C12 |
| 2 | 27pF 25V | Capacitor_SMD:C_0805_2012Metric | C26, C27 |
| 2 | 3V6 5% | Diode_SMD:D_SOD-323 | D7, D10 |
| 2 | Conn_01x04_Male | LolomoloKiCADLib:4 Wire Pad | J1, J7 |
| 2 | PSMN039-100YS,115 | LolomoloKiCADLib:PSMN5R660YLX | Q1, Q2 |
| 1 | 0.03 1% 0.5W | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | 0.3 1% 1W | Resistor_SMD:R_2512_6332Metric | R15 |
| 1 | 100k %5 | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 100k 1% | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 120 5% | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1k 5% | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1k2 5% | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | 1k5 5% | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 1uF 100V | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 20k5 1% | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 22k 1% | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 22nF 100V | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 330 1% | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 33k 5% | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 36k5 1% | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 47k 1% | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 47k 5% | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 4k7 5% | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 68k 5% | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 7447709330 33uH 4.2A 45MOHM | 7447709330:WE-PD_1260%2f1245%2f1280%2f121054 | L2 |
| 1 | 9.09 1% | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 97uH 2.7A | LolomoloKiCADLib:ETQ-P5M101YGC Inductor | L1 |
| 1 | AP2139AK-3.3TRG1 | Package_TO_SOT_SMD:SOT-23-5 | IC9 |
| 1 | ATMEGA328P-AUR | Package_QFP:TQFP-32_7x7mm_P0.8mm | IC6 |
| 1 | Conn_01x02_Male | LolomoloKiCADLib:2WirePad | J6 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x08_Odd_Even | LolomoloKiCADLib:Conn_2x8_0.05in | J3 |
| 1 | D | Diode_SMD:D_SOD-323 | D11 |
| 1 | ECS-80-18-30B-AGN-TR | ECS-80-18-30B-AGN-TR:ECS801830BAGNTR | Y1 |
| 1 | LEDR | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | LM5118MH_NOPB | LM5118MH_NOPB:SOP65P640X110-21N | IC4 |
| 1 | LMR36520FADDAR | LMR36520FADDAR:SOIC127P600X170-9N | IC5 |
| 1 | LSM6DS3USTR | LSM6DS3USTR:LGA-14(2.5X3X0.86) | IC1 |
| 1 | MAXM15062AMB+ | MAXM15062AMB+:MAXM15462AMB | IC2 |
| 1 | MCP2515T-I_SO | MCP2515T-I_SO:SOIC127P1030X265-18N | IC8 |
| 1 | MCP2562-E_SN | MCP2562-E_SN:SOIC127P600X175-8N | IC7 |
| 1 | MCP4132-502E_SN | Package_SO:TSSOP-8_3x3mm_P0.65mm | IC3 |
| 1 | MountingHole | LolomoloKiCADLib:Wire Slot 1 | H3 |
| 1 | MountingHole_Pad | LolomoloKiCADLib:ThermalPadV2_SkateLight_L | H1 |
| 1 | MountingHole_Pad | LolomoloKiCADLib:ThermalPadV2_SkateLight_R | H2 |
| 1 | TC2030-MCP | LolomoloKiCADLib:TC2030MCP | J4 |
More from dannyandreev/BOM-Lights
12- 4 layers45 × 63.8 mm

- 4 layers45 × 63.8 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers47.6 × 13.3 mm

- 2 layers25.4 × 9.5 mm

Similar boards
- 4 layers118 × 117 mm

Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 2 layers52 × 36 mm

CyphalPicoBase CAN
generationmake/CyphalPicoBase-CAN
Board for the Raspberry Pi Pico to connect via CAN using OpenCyphal and UCANPHY Micro
62 parts5CERN-OHL-W-2.0 - 2 layers96 × 90 mm

- 2 layers82.5 × 101.6 mm

- 2 layers109.4 × 106.3 mm

- 2 layers31.2 × 22.1 mm

SPItoCAN
PhoenixRacing/Sensing22_23
A variety of KiCAD schematics, PCBs, and other fun stuff from your favorite offroad vehicle team at Olin Collge of Engineering
30 parts - 2 layers65 × 56.5 mm

- 4 layers38 × 39 mm

CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
103 parts1.1k
Questions
How big is the SkateLightMainBoard PCB?
It measures 45 × 63.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SkateLightMainBoard use?
103 parts, built around the MAXM15062AMB+, AP2139AK-3.3TRG1, MCP2515T-I/SO-HX and FDMA410NZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SkateLightMainBoard KiCad files?
From the dannyandreev/BOM-Lights repository on GitHub, at the commit this page was made from: the board is Electrical/SkateLightMainBoard/SkateLightMainBoard3.2/SkateLightMainBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SkateLightMainBoard design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).