
OASIS SH Board
h07jonas/O.A.S.I.S.
An ESP32-S3 based haptic distance warning system utilizing non-linear Time-of-Flight (ToF) sensor scaling. Developed as a graduation project (BüP) at AGS Basel.

A Raspberry Pi Pico powered PLC like general purpose control board.
Pico plc is an open-source printed circuit board by DanNixon, from the DanNixon/pico-plc repository on GitHub, published under the MIT licence. It is a 2-layer board of 181.5 × 72 mm with 140 parts on 170 nets, routed with 437 tracks and 67 vias.
It is built around the DS18B20, VO615A and NDS355AN, with the BSS138 among its other parts. Its parts include 44 resistors, 27 diodes, 21 connectors, 9 ICs and 9 transistors. It belongs with the RP2040 and RP2350 boards of this library.
KiCad flavoured design files for the Pico-PLC PCB.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R18, R19, R22, R23, R26, R27, R30, R31, R34, R35, R38, R39, R42, R43, R46 +9 |
| 16 | Jumper_2_Open | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP21, JP22, JP23, JP24, JP25, JP26, JP27, JP28, JP41, JP42, JP44, JP45, JP47, JP48, JP50, JP51 |
| 16 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4, D6, D8, D10, D12, D14, D16, D18, D20, D21, D22, D23, D24, D25, D26, D27 |
| 9 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D5, D7, D9, D11, D13, D15, D17, D19 |
| 9 | Screw_Terminal_01x02 | Conn_ScrewTerminals:CTB7000-2 | J7, J26, J27, J28, J29, J30, J31, J32, J33 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R21, R25, R29, R33, R37, R41, R45 |
| 8 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49, R51, R53, R55, R57, R59, R61, R63 |
| 8 | NDS355AN | Package_TO_SOT_SMD:SOT-23-3 | Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15 |
| 8 | Relay_SPDT | Relay_THT:Relay_SPDT_Finder_36.11 | K1, K2, K3, K4, K5, K6, K7, K8 |
| 8 | Screw_Terminal_01x03 | Conn_ScrewTerminals:CTB7000-3 | J18, J19, J20, J21, J22, J23, J24, J25 |
| 8 | VO615A | Package_DIP:SMDIP-4_W9.53mm | U2, U3, U4, U5, U6, U7, U8, U9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15, J16 |
| 1 | 3.3v On LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline_Wide | U1 |
| 1 | Power In LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
The 139 most common of 140 parts.

h07jonas/O.A.S.I.S.
An ESP32-S3 based haptic distance warning system utilizing non-linear Time-of-Flight (ToF) sensor scaling. Developed as a graduation project (BüP) at AGS Basel.


ARTS-Laboratory/SPECIES
Design and development of a deployable UAV smart penetrometer


MaximeZimmermann/OpenSpritzer-V2
OpenSpritzer v2 An Open hardware pressure ejection system for reliably delivering picolitre volumes. developed by M.J.Y. Zimmermann



It measures 181.5 × 72 mm and has 2 copper layers, 1.6 mm thick.
140 parts, built around the DS18B20, VO615A, NDS355AN and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DanNixon/pico-plc repository on GitHub, at the commit this page was made from: the board is pcb/pico-plc.kicad_pcb and its schematic pcb/general_io.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).