Skip to the content
123

NDS355AN

onsemiExtended

-55℃~+150℃ 1 N-channel 1.7A 125mΩ@4.5V 135pF 195pF 2V 30V 48pF 500mW 5nC@5V N-Channel SOT-23 MOSFETs ROHS

Part id
onsemi/NDS355AN
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
11,501 at JLCPCB (C236917)
Used on
3 open-source boards

Overview

The NDS355AN is a MOSFET made by onsemi in a SOT-23 package with 3 pins. -55℃~+150℃ 1 N-channel 1.7A 125mΩ@4.5V 135pF 195pF 2V 30V 48pF 500mW 5nC@5V N-Channel SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 11,501 are in stock at JLCPCB (part C236917). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

10
Drain-source, most
30 V · drain-source voltage, absolute max · p. 1
Gate-source, most
20 V · gate-source voltage, continuous, ±20 V absolute max · p. 1
Drain current, most
1.7 A · continuous drain current, TA = 25°C, Note 1a, max · p. 1
Junction, hottest
150 °C · operating junction temperature, max · p. 1
On resistance
125 mΩ · VGS = 4.5 V, ID = 1.7 A, TA = 25°C, max · p. 2
On resistance
85 mΩ · VGS = 10 V, ID = 1.9 A, TA = 25°C, max · p. 2
Gate threshold
1.6 V · VDS = VGS, ID = 250 uA, TA = 25°C, typical · p. 2
Junction to air (SOT-23)
250 K/W · junction-to-ambient, Note 1a board mounting, typical · p. 1
Forward current, most
420 mA · drain-source body diode, continuous, max · p. 3
Forward voltage
800 mV · body diode, VGS = 0 V, IS = 0.42 A, typical · p. 3

Open-source boards using it

3
  • 2 layers181.5 × 72 mmPico plc, the printed circuit board in 3D

    Pico plc

    DanNixon/pico-plc

    A Raspberry Pi Pico powered PLC like general purpose control board.

    140 parts2MIT
  • 2 layers60 × 23 mmOASIS SH Board, the printed circuit board in 3D

    OASIS SH Board

    h07jonas/O.A.S.I.S.

    An ESP32-S3 based haptic distance warning system utilizing non-linear Time-of-Flight (ToF) sensor scaling. Developed as a graduation project (BüP) at AGS Basel.

    18 parts1MIT
  • 4 layers152 × 74 mmVXDash Emulator, the printed circuit board in 3D

    VXDash Emulator

    martinroger/VXDash

    An instrument cluster for the VX220

    365 parts3CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NDS355AN?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NDS355AN?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the NDS355AN datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NDS355AN?

JLCPCB lists it as part C236917, with 11,501 in stock; the sellers' links on this page open their listings.

What can replace the NDS355AN?

Parts like it in the library: the AO3400 by GOODWORK, the AO3400A by Alpha & Omega Semiconductor, the AO3400A by UMW and the AO3401A by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NDS355AN?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.