
Power Unit
Project-SkyFall/CanSat-2023
This is repository for Czech CanSat team Project SkyFall

NISoC Readout 1 Power Board
NR1B Power is an open-source printed circuit board by Flanagan-Lab-Neutron-Detector, from the Flanagan-Lab-Neutron-Detector/NR1B-Power repository on GitHub. It is a 4-layer board of 70.5 × 134 mm with 43 parts on 156 nets, routed with 141 tracks and 110 vias.
It is built around the DKMW06F-05, TSR 1-2450 and VO615A, with the APT2012LZGCK, APT2012LSECK/J3-PRV and S1G among its other parts. Its parts include 13 resistors, 9 diodes, 6 capacitors, 4 ICs and 3 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4.7K | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5, R6, R8, R9 |
| 5 | Green | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D6, D9 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3 |
| 2 | 0.1" Female long-tail | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1, J2 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 1.5K | Resistor_SMD:R_0805_2012Metric | R3, R7 |
| 2 | 12K | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R10, R13 |
| 2 | 22uF | Capacitor_SMD:CP_Elec_5x5.3 | C3, C4 |
| 2 | Red | LED_SMD:LED_0805_2012Metric | D7, D8 |
| 2 | VO615A | Package_DIP:DIP-4_W7.62mm_LongPads | U3, U4 |
| 1 | 0.75 A | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | 200 mA | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | 250 mA | Fuse:Fuse_1812_4532Metric | F3 |
| 1 | 3.81mm Pluggable Terminal | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J3 |
| 1 | 30@100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 36V | Diode_SMD:D_SOD-323 | D2 |
| 1 | 47uF 16V | Capacitor_SMD:CP_Elec_5x5.3 | C2 |
| 1 | 47uF 50V | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | DKMW06 | NISoC-Socket:Converter_DCDC_Meanwell_DKMW06 | U2 |
| 1 | NUCLEO144-ZIO | NISoC-Socket:ST_Morpho_Connector_144_STLink_MountingHoles | X1 |
| 1 | S1G | Diode_SMD:D_SMA | D1 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U1 |

Project-SkyFall/CanSat-2023
This is repository for Czech CanSat team Project SkyFall

LouisVizard/HeadphoneAmp
Electric guitar headphone amplifier PCBA that runs off of a 9V battery.


drogue-iot/burrboard
This repository contains prototyping boards for RH summit, aka burrboards, firmware running on the burrboard feathers, and the software around it

arraym/ESP8266Tetris
Tetris game with ESP8266 (ESP-12F) and WS2812B (128 RGB LEDs) - KiCAD schematic and PCB

WAFFLE-Systems/PEC_Sensor
Electrical schematics and PCB gerber files for the Pulsed Eddy Current Sensor

nherbaut/pico-power-sensor
This board sockets a Pico 2 W, provides five programmable green LEDs and a microSD slot, and connects to the INA229EVM through a left-edge right-angle socket.

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
It measures 70.5 × 134 mm and has 4 copper layers, 4.69 mm thick.
43 parts, built around the DKMW06F-05, TSR 1-2450, VO615A and APT2012LZGCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Flanagan-Lab-Neutron-Detector/NR1B-Power repository on GitHub, at the commit this page was made from: the board is v1.0/NR1B-Power.kicad_pcb and its schematic v1.0/NR1B-Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Flanagan-Lab-Neutron-Detector before reusing the design.