Skip to the content
PCBKitNew board
S1G on a board, in 3D

S1G

TWGMC

-55℃~+150℃ 1.1V@1A 1A 30A 400V 5uA Independent SMA(DO-214AC) Diodes - General Purpose ROHS

Extended
Category
Diodes General Purpose
Package
SMA(DO-214AC)
Pins
2

Overview

The S1G is a diodes General Purpose made by TWGMC in a SMA(DO-214AC) package with 2 pins. -55℃~+150℃ 1.1V@1A 1A 30A 400V 5uA Independent SMA(DO-214AC) Diodes - General Purpose ROHS.

PCBKit's library has its KiCad symbol (Device:D, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 29,643 are in stock at JLCPCB (part C727098). 15 open-source boards in 14 repositories on GitHub use it.

Symbol

Device:DFrom KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

From the datasheet

5
Reverse voltage, most
400 V · S1G, repetitive peak reverse voltage, max · p. 1
Forward current, most
1 A · average rectified current at TL = 110°C, max · p. 1
Forward voltage
1.1 V · instantaneous at 1.0 A, max · p. 1
Junction, hottest
150 °C · operating junction temperature, max · p. 1
Junction to air (DO-214AC/SMA)
75 K/W · PCB mounted with 5.0 × 5.0 mm copper pad areas, typical · p. 1

Parameters

9
Current - Rectified
1A
Diode Configuration
Standalone
Junction Temperature(Max)
150℃
Non-Repetitive Peak Forward Surge Current
30A
Operating Junction Temperature Range
-55℃~+150℃
Reverse Leakage Current (Ir)
5uA
Thermal Resistance(Junction to Ambient)
75℃/W
Voltage - DC Reverse(Vr)
400V
Voltage - Forward(Vf@If)
1.1V

Order codes

1

Pinout

2
The pins of the S1G
PinNameType
1KPassive
2APassive

Open-source boards using it

All 15
  • 4 layers33 × 90 mmActive drag system, the printed circuit board in 3D

    Active drag system

    RocketryVT/active-drag-system

    Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.

    100 parts6MIT
  • 2 layers50 × 47.3 mmSR Aktor, the printed circuit board in 3D

    SR Aktor

    gerryvel/SR-Aktor

    Switch Relais Aktor N2k

    26 parts3GPL-3.0
  • 2 layers100 × 100 mmGatekeeper PCB, the printed circuit board in 3D

    Gatekeeper PCB

    Ingimarsson/gatekeeper

    Access control and monitoring system for electric door locks and automatic traffic barriers.

    61 parts1MIT
  • 4 layers95 × 95 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    ParadigmEngineering/igvc-2023-hardware

    Intelligent Ground Vehicle Competition (Spring 2023) hardware for the Paradigm Engineering Student Group

    175 parts1
  • 2 layers99.5 × 99.5 mmCarico elettronico, the printed circuit board in 3D

    Carico elettronico

    dario0603/electronic_load

    Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.

    92 parts
  • 2 layers99.5 × 99.5 mmAlimentatore JM, the printed circuit board in 3D

    Alimentatore JM

    dario0603/power_supply

    Progetto universitario per la realizzazione e simulazione di un Alimentatore da Banco Stabilizzato , completo di schemi elettrici KiCad, simulazioni LTspice, documentazione tecnica e file Gerber per la produzione del…

    120 parts
  • 4 layers70.5 × 134 mmNR1B Power, the printed circuit board in 3D

    NR1B Power

    Flanagan-Lab-Neutron-Detector/NR1B-Power

    NISoC Readout 1 Power Board

    43 parts
  • 4 layers70.5 × 134 mmNR1B ST56, the printed circuit board in 3D

    NR1B ST56

    Flanagan-Lab-Neutron-Detector/NR1B-ST56

    NISoC Readout 1 Socket-TSOP56 Board

    46 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/twgmc/S1G" title="S1G in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/twgmc/S1G.jpg" alt="S1G" width="1200" height="900">
A picture that opens the part, for a README
[![S1G](https://pcbkit.io/embed/parts/twgmc/S1G.jpg?size=s)](https://pcbkit.io/parts/twgmc/S1G)

Questions

Is there a KiCad symbol and footprint for the S1G?

Yes. The symbol is Device:D and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the S1G?

SMA(DO-214AC), with 2 pins. Its footprint is drawn on this page.

Where is the S1G datasheet?

TWGMC publishes it: the Datasheet link on this page opens it.

Where can I order the S1G?

JLCPCB lists it as part C727098, with 29,643 in stock; the sellers' links on this page open their listings.

What can replace the S1G?

Parts like it in the library: the M7 by MDD, the M7 by hongjiacheng, the M7 by MSKSEMI and the M7 by Yangzhou Yangjie Electronic Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the S1G?

15 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8