
Autonomous Drift Cart PCB
danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.
Controller V1 is an open-source printed circuit board by danielwilczak101, from the danielwilczak101/EasyDrift repository on GitHub. It is a 2-layer board of 142.9 × 87.6 mm with 18 parts on 59 nets, routed with 137 tracks and 6 vias.
It is built around the COM-09032. Its parts include 3 ICs, 2 capacitors, 2 resistors, 2 diodes and 2 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | e, H4, He, He |
| 2 | 220_R_Small_US | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | COM-09032 | MCU_RaspberryPi_and_Boards:XDCR_COM-09032 | U1, U3 |
| 2 | SW_12mm_Push | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2 |
| 1 | Antenna_Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | CP1 | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | C_Small | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Green_LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM1117T-3.3_NOPB | MCU_RaspberryPi_and_Boards:SOT230P696X180-4N | VR1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U2 |
| 1 | RED_LED | LED_THT:LED_D3.0mm | D2 |
| 1 | USB1130-15-A_REVA | MCU_RaspberryPi_and_Boards:GCT_USB1130-15-A_REVA | J2 |

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project



Hex-4/glyph
[ a custom split keyboard for portably and comfortably interfacing with computing systems ]

Josh4minee/HEX-B12.V1
HEX-B12.V120 is a custom designed hexapod using mg996r servos and has it's theme based on the beloved bot B-12 from the popular video game STRAY.

shiva233/Project-Hermes
Project Hermes is a handheld "console" designed for people who already own gaming PCs so they can stream their games via SteamLink so they can take it anywhere for cheap!

kayaked/esp32-ble-mouse-remote
Bluetooth LE hybrid of a computer mouse and a TV remote. (software/electronics)

Reiko0908/NeuralNetwork_Based_AutonomousCar
This project focuses on developing an autonomous car system powered by neural networks (NN). It utilizes deep learning techniques to enable key functionalities such as perception, path planning, and control.
It measures 142.9 × 87.6 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the COM-09032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielwilczak101/EasyDrift repository on GitHub, at the commit this page was made from: the board is pcb/AutonomousCC/Controller_V1/Controller_V1.kicad_pcb and its schematic pcb/2024_Autonomous_CC_PCB/Autonomous Drift Cart PCB/Autonomous Drift Cart PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danielwilczak101 before reusing the design.