
CC PCB V1
danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.
Autonomous Drift Cart PCB is an open-source printed circuit board by danielwilczak101, from the danielwilczak101/EasyDrift repository on GitHub. It is a 2-layer board of 185.2 × 141.7 mm with 121 parts on 165 nets, routed with 634 tracks and 9 vias.
It is built around the 500SSP1S2M2QEA. Its parts include 35 resistors, 22 connectors, 21 diodes, 20 transistors and 11 switches. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R10, R11, R12, R13, R14, R15, R17, R18, R19, R21, R34, R35, R37 +4 |
| 10 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25, R26, R27, R28, R29, R30, R31, R32, R36 |
| 10 | LED2 | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D2, D3, D4, D6, D8, D14, D15, D17, D22 |
| 10 | ~ | Diode_SMD:D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D7, D9, D10, D11, D12, D13, D18, D19, D21, D23 |
| 10 | ~ | dylan:DIP762W50P254L650H458Q4B | Q1, Q2, Q3, Q4, Q5, Q11, Q12, Q14, Q19, Q21 |
| 10 | ~ | Relay_THT:Relay_SPDT_Finder_36.11 | K1, K2, K3, K4, K5, K6, K7, K9, K10, K11 |
| 10 | ~ | Package_TO_SOT_THT:TO-92_Inline | Q6, Q7, Q8, Q9, Q10, Q15, Q16, Q18, Q20, Q22 |
| 10 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J11, J12, J13, J14, J15, J16, J17, J19, J29 |
| 4 | Level Shifter | dylan:CONV_BOB-12009 | U1, U2, U5, U8 |
| 4 | MountingHole | MountingHole:MountingHole_5.3mm_M5 | H1, H2, H3, H4 |
| 2 | RC_ThrottleOut_3.3v_5v | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 12.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 12V IN | dylan:AMASS_XT60PW-M | J25 |
| 1 | 12V TO 5V LM2596 (3A) | dylan:DCDC_StepDown_LM2596 | U6 |
| 1 | 300 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 500SSP1S2M2QEA | dylan:SW_500SSP1S2M2QEA | S2 |
| 1 | Auto_PICO_Power/Coms | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J7 |
| 1 | Autonomous Pico | dylan:RPi_Pico_SMD_TH | U4 |
| 1 | Battery E-Stop Connector | dylan:TE_282837-2 | J20 |
| 1 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D5 |
| 1 | LOGO | dylan:eppl_logo2 | G*** |
| 1 | Linear Actuator Connector | dylan:TE_282837-2 | J10 |
| 1 | Physical E-Stop Button Connection | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J30 |
| 1 | RC Pico | dylan:RPi_Pico_SMD_TH | U3 |
| 1 | RC Reciever | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | RC_PICO_Power/Coms | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J1 |
| 1 | Stepper Motor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | ThrottleInputADC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | ThrottleOut | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

dannyandreev/32x32-Matrix
Setup from clean Windows: Install Git: https://gitforwindows.org/ Install VSCode: https://code.visualstudio.com/Download Install Python: https://www.python.org/downloads/release/python-3121/ Debug PIP…

andyMath7745/JustDance-TinyML-Embedded
Inspired by the game Just Dance, a DIY Embedded System to classify user gestures and simulate 2-player gameplay

Dixit-Golakiya/Master-Thesis-Project
Custom 2-layer PCB (192 mm × 166 mm) built around a NUCLEO-G474RE evaluation board, providing all sensing and excitation circuitry for the supercapacitor health monitoring system.


momoenomoto/robot-hand-teleoperative-system
Wireless glove controlled robotic hand using BLE 5 and STM32F7 MCU with Cortex-M7



zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
It measures 185.2 × 141.7 mm and has 2 copper layers, 1.6 mm thick.
121 parts, built around the 500SSP1S2M2QEA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielwilczak101/EasyDrift repository on GitHub, at the commit this page was made from: the board is pcb/2024_Autonomous_CC_PCB/Autonomous Drift Cart PCB/Autonomous Drift Cart PCB.kicad_pcb and its schematic pcb/2024_Autonomous_CC_PCB/Autonomous Drift Cart PCB/Autonomous Drift Cart PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danielwilczak101 before reusing the design.