
Remote unit
danielmcmillan/irrigation-system
Hardware and software for irrigation control and monitoring

Hardware and software for irrigation control and monitoring
Irrigation controller is an open-source printed circuit board by danielmcmillan, from the danielmcmillan/irrigation-system repository on GitHub, published under the MIT licence. It is a 2-layer board of 109 × 48.3 mm with 39 parts on 52 nets, routed with 295 tracks and 20 vias.
It is built around the MAX3485ED, RS485 and TPS54331DR-JSM, with the AQY280EH among its other parts. Its parts include 9 resistors, 8 capacitors, 8 connectors, 4 ICs and 3 diodes. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C7, C17, C19, C21 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | 3k | Resistor_SMD:R_0603_1608Metric | R5, R17 |
| 2 | 560 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | AQY280EH | Package_DIP:DIP-4_W7.62mm | U1, U3 |
| 2 | ESP32 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J8, J9 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 200mA | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | F1 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 4.7uH | Inductor_SMD:L_Changjiang_FNR4020S | L1 |
| 1 | 550mV 1A | Diode_SMD:D_SMA | D3 |
| 1 | 8.2nF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | I/O | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J3 |
| 1 | LOGO | lib:avocado | G*** |
| 1 | MAX3485 | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | PWR 24V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | RELAY_1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | RELAY_2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | RF Module | lib:YL_800T | J5 |
| 1 | RS485 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | TPS54331DR | TPS54331DR:Texas_Instruments-TPS54331DR-Level_A | U4 |

danielmcmillan/irrigation-system
Hardware and software for irrigation control and monitoring


Marimugeshbabu/STM32-Industrial-Data-Logger
4-layer STM32 Industrial Data Logger designed in KiCad 9 with RS485, microSD, voltage/current sensing and protection circuitry.

anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

fraxinas/DoorBirdPico
A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.

austinscreations/Oxrs-Black
a custom rack controller that is based of the rack32 but includes some upgrades and major changes

bclswl0827/openstation
An open source, cross-platform, easy-to-use satellite automatic tracking system with hardware & software solutions.

ieb/BatterySensor
A Modbus RTU Battery Current and Voltage sensor board based Attiny3224, MAX485, MAX9918 chips.

It measures 109 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the MAX3485ED, RS485, TPS54331DR-JSM and AQY280EH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielmcmillan/irrigation-system repository on GitHub, at the commit this page was made from: the board is hardware/irrigation-controller/irrigation-controller.kicad_pcb and its schematic hardware/irrigation-controller/irrigation-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).