2 layers92 × 90 mm
2 layers60 × 50 mm
Line sensor2
daisuke-ym/motor-driver- Size
- 60 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 18
- Pads
- 74
- Tracks, vias
- 109, 29
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2024
- Updated
- 25 Apr 2026
Overview
Line sensor2 is an open-source printed circuit board by daisuke-ym, from the daisuke-ym/motor-driver repository on GitHub. It is a 2-layer board of 60 × 50 mm with 32 parts on 18 nets, routed with 109 tracks and 29 vias.
Its parts include 8 diodes, 4 resistors, 4 ICs, 1 capacitor and 1 connector.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4, MH5, MH6, MH8, MH9, MH10 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 4 | 4K7 | MyLib:GF063P1 | RV1, RV2, RV3, RV4 |
| 3 | IR LED | LED_THT:LED_D3.0mm_Clear | D1, D2, D3 |
| 3 | S7136 | MyLib:S7136 | U1, U2, U3 |
| 2 | RED | LED_THT:LED_D3.0mm_Clear | D5, D7 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | BLUE | LED_THT:LED_D3.0mm_Clear | D6 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | IR LED | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z6.0mm | D4 |
| 1 | S6809 | MyLib:S6809_Horizontal_Facedown | U4 |
| 1 | YELLOW | LED_THT:LED_D3.0mm_Clear | D8 |
Questions
How big is the Line sensor2 PCB?
It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Line sensor2 use?
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Line sensor2 KiCad files?
From the daisuke-ym/motor-driver repository on GitHub, at the commit this page was made from: the board is pcb/line-sensor2/line-sensor2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Line sensor2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask daisuke-ym before reusing the design.
More from daisuke-ym/motor-driver
12- 2 layers230 × 63 mm
- 2 layers142 × 134 mm
- 2 layers142 × 134 mm
- 2 layers230 × 63 mm
- 2 layers153 × 58 mm
- 2 layers80 × 74 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers72 × 54 mm
- 2 layers140 × 40 mm
- 2 layers72 × 54 mm
Similar boards
- 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT - 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers30.9 × 63 mm
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
32 parts170CC0-1.0