

Motor driver2
- Size
- 80 × 74 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 45
- Pads
- 204
- Tracks, vias
- 304, 0
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2024
- Updated
- 25 Apr 2026
Overview
Motor driver2 is an open-source printed circuit board by daisuke-ym, from the daisuke-ym/motor-driver repository on GitHub. It is a 2-layer board of 80 × 74 mm with 71 parts on 45 nets, routed with 304 tracks and 0 vias.
It is built around the IR2302PBF and TLP627-4(F). Its parts include 28 resistors, 12 diodes, 9 capacitors, 8 transistors and 6 ICs. It belongs with the robots and motor control boards of this library.
Main components
2IR2302PBF
PDIP-8-40℃~+150℃ 130ns 1mA 2 200mA 350mA 50ns 5V~20V Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICsTLP627-4(F)
DIP-16-25℃~+85℃ 1.15V 1.2V@100mA,10mA 1000% 120mA 15us 300V 4 4000% 40us 5V 5kV Phototransistor DIP-16 Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output Optoisolators
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R4, R5, R6, R7, R9, R10, R14, R15, R16, R17, R19, R20, R21, R22 |
| 8 | 1N4007 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp | D3, D4, D5, D6, D9, D10, D11, D12 |
| 8 | Q_NMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R8, R11, R18, R23, R24 |
| 6 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R25, R26, R27, R28, R29, R30 |
| 4 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C7, C8 |
| 4 | 10u | Capacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mm | C1, C2, C5, C6 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1, D2, D7, D8 |
| 4 | IR2302 | Package_DIP:DIP-8_W7.62mm | U3, U4, U5, U6 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 2 | Motor_DC | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | M1, M2 |
| 2 | TLP627-4 | Package_DIP:DIP-16_W7.62mm | U1, U2 |
| 1 | 470u 50V | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C9 |
| 1 | Input Logic | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Motor Power | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J1 |
More from daisuke-ym/motor-driver
12- 2 layers92 × 90 mm

- 2 layers230 × 63 mm

- 2 layers142 × 134 mm

- 2 layers142 × 134 mm

- 2 layers230 × 63 mm

- 2 layers153 × 58 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers72 × 54 mm

- 2 layers140 × 40 mm

- 2 layers72 × 54 mm

- 2 layers80 × 78 mm

Similar boards
- 2 layers87 × 56 mm

- 4 layers181.4 × 77.2 mm

NixieNTPClock
bastian-bou/NixieNTPClock
Nixie clock around ESP32 connected to a NTP server
64 parts3GPL-3.0 - 2 layers100 × 102 mm

- 2 layers150 × 100 mm

PonchoPLC
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
120 parts15 - 2 layers86 × 137 mm

Poncho Alarma
brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
46 parts7 - 4 layers100 × 60 mm

- 2 layers155 × 114 mm

- 2 layers80 × 50 mm

NHK 2025 circuit public var
TOBA-Robocon/NHK_2025_circuit_public_var
鳥羽商船Aチームが2025年度のNHK高専ロボコンで使用した基板(公開用に多少編集済み)
81 parts1
Questions
How big is the Motor driver2 PCB?
It measures 80 × 74 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor driver2 use?
71 parts, built around the IR2302PBF and TLP627-4(F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor driver2 KiCad files?
From the daisuke-ym/motor-driver repository on GitHub, at the commit this page was made from: the board is pcb/motor-driver2/motor-driver2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor driver2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask daisuke-ym before reusing the design.