2 layers92 × 90 mm
2 layers230 × 63 mm
Patch board
daisuke-ym/motor-driver- Size
- 230 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 157
- Pads
- 486
- Tracks, vias
- 855, 60
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2024
- Updated
- 25 Apr 2026
Overview
Patch board is an open-source printed circuit board by daisuke-ym, from the daisuke-ym/motor-driver repository on GitHub. It is a 2-layer board of 230 × 63 mm with 108 parts on 157 nets, routed with 855 tracks and 60 vias.
It is built around the S06, 74HC08D and 74HC00D, with the 74HC14, S02 and S10 among its other parts. Its parts include 37 connectors, 18 capacitors, 13 ICs, 11 switches and 10 resistors.
Main components
6S06
--40℃~+85℃ 1.5V~3.6V 2bar - Pressure Sensors ROHSVersaSensePressure Sensors
74HC08D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV 2 27ns@4.5V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInvertersS02
UncategorisedCELS10
-- DC Power Connectors ROHSSwitchcraftDC Power Connectors
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C20 |
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 74HC08 | Package_SO:SO-14_5.3x10.2mm_P1.27mm | U2, U3, U5, U6, U9, U10, U12, U13 |
| 6 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R8, R9, R10 |
| 6 | SV | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J41, J42, J43, J44, J45, J46 |
| 4 | 1u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C21, C22, C23, C24 |
| 4 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 4 | 5k | MyLib:GF063P1 | RV1, RV2, RV3, RV4 |
| 4 | 74HC00 | Package_SO:SO-14_5.3x10.2mm_P1.27mm | U1, U4, U8, U11 |
| 2 | LED_RCBG | LED_THT:LED_D5.0mm-4_RGB | D11, D12 |
| 2 | SW_DPST | MyLib:DTS-6-V-2 | SW11, SW12 |
| 1 | 330 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 74HC14 | Package_SO:SO-14_5.3x10.2mm_P1.27mm | U7 |
| 1 | AOUT1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | AOUT2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | AOUT3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | AOUT4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | AOUT5 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | AOUT6 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | AOUT7 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | AOUT8 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW13 |
| 1 | D1A | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW1 |
| 1 | D1B | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW2 |
| 1 | D2A | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW3 |
| 1 | D2B | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW4 |
| 1 | D3A | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW5 |
| 1 | D3B | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW6 |
| 1 | D4A | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW7 |
| 1 | D4B | MyLib:TactSW_TVBP06_3.5x6.0-ThroughHole | SW8 |
| 1 | DIGITAL OUT1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | DIGITAL OUT2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | DIGITAL OUT3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J23 |
| 1 | DIGITAL OUT4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J24 |
| 1 | LOGIC POWER SUPPLY | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | MEGA_13-8 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | MEGA_14-21 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | MEGA_22-53 | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J9 |
| 1 | MEGA_7-0 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | MEGA_A0-A7 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | MEGA_A8-A15 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | MEGA_POWER | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | S01 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J31 |
| 1 | S02 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J32 |
| 1 | S03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J33 |
| 1 | S04 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J34 |
| 1 | S05 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J35 |
| 1 | S06 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J36 |
| 1 | S07 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J37 |
| 1 | S08 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J38 |
| 1 | S09 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J39 |
| 1 | S10 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J40 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
The 104 most common of 108 parts.
Questions
How big is the Patch board PCB?
It measures 230 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Patch board use?
108 parts, built around the S06, 74HC08D, 74HC00D and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Patch board KiCad files?
From the daisuke-ym/motor-driver repository on GitHub, at the commit this page was made from: the board is pcb/patch-board/patch-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Patch board design in my own project?
Its repository states no licence, so its author keeps all rights: ask daisuke-ym before reusing the design.
More from daisuke-ym/motor-driver
12- 2 layers230 × 63 mm
- 2 layers142 × 134 mm
- 2 layers142 × 134 mm
- 2 layers153 × 58 mm
- 2 layers80 × 74 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers72 × 54 mm
- 2 layers140 × 40 mm
- 2 layers72 × 54 mm
- 2 layers80 × 78 mm
Similar boards
- 2 layers19.9 × 10 mm
- 4 layers158.8 × 104.1 mm
- 6 layers210 × 119 mm
Claculator Keypad
Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
202 parts5 - 2 layers213.1 × 129 mm
- 2 layers
- 2 layers100 × 160 mm
Akku
michAtEl/Bonsai-Modellcomputer
Es gibt auch eine Simulation des Lerncomputers (https://bonsai.pinyto.de/), die im digitalen Informatik-Schulbuch http://inf-schule.de verwendet wird.
60 parts2GPL-3.0 - 2 layers160 × 100 mm
- 4 layers180.3 × 154.9 mm
