Skip to the content
2 layers56.3 × 32 mmESP12-E breakout board, the printed circuit board in 3D

ESP12-E breakout board

cyberstormdotmu/ESP12E-breakout3

A simple and open source ESP12E/ ESP8266 breakout board. You will need an external programmer to program the module but most of the components required to run the module are present. Made with KiCad.

Size
56.3 × 32 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
26
Pads
76
Tracks, vias
166, 11
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 May 2019
Updated
2 Jun 2019

Overview

ESP12-E breakout board is an open-source printed circuit board by cyberstormdotmu, from the cyberstormdotmu/ESP12E-breakout repository on GitHub. It is a 2-layer board of 56.3 × 32 mm with 18 parts on 26 nets, routed with 166 tracks and 11 vias.

It is built around the ESP-12E and AMS1117-3.3. Its parts include 5 resistors, 4 capacitors, 2 ICs, 2 switches and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP8266 boards of this library.

Main components

2

README

README.md

ESP12E-breakout

A simple and open source ESP12E/ ESP8266 breakout board. You will need an external programmer to program the module but most of the components required to run the module are present. Made with KiCad.

To open the schematic and pcb file you will need KiCad.

Schematic pdf and PCB photos are provided.

breakoutesp12e.zip is a gerber file.

If you have any questions regarding the design or find any issues then just email me at nathan@cyberstorm.mu

Happy Hacking :)

Parts

18
QtyValueFootprintReferences
41KResistor_SMD:R_0805_2012MetricR1, R2, R4, R5
2100nFCapacitor_SMD:C_0805_2012MetricC2, C4
210uFCapacitor_SMD:C_0805_2012MetricC1, C3
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1, SW2
1220Resistor_SMD:R_0805_2012MetricR6
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Conn_01x22_MountingPinConnector_PinHeader_2.54mm:PinHeader_1x22_P2.54mm_VerticalJ1
1ESP-12ERF_Module:ESP-12EU1
1LEDLED_SMD:LED_0805_2012MetricD1
1LOGOlogo:wrrG***

The 16 most common of 18 parts.

Similar boards

  • 2 layers101.6 × 147.3 mmKarabas pro revER, the printed circuit board in 3D

    Karabas pro revER

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    223 parts37MIT
  • 2 layers68.5 × 53.3 mmIot wifi uno hw, the printed circuit board in 3D

    Iot wifi uno hw

    iotmakervn/iot-wifi-uno-hw

    Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno

    56 parts26
  • 2 layers26.4 × 17.3 mmKnock homekit v1, the printed circuit board in 3D

    Knock homekit v1

    andrewngai/HomekitKnock

    This repo is the resources for the project on https://youtu.be/X5OxuFtGn0

    12 parts17
  • 2 layersSmol boy V1, the printed circuit board in 3D

    Smol boy V1

    BogdanTheGeek/ESP_RC

    An Open-Source Transmitter/Receiver for RC Planes, Cars, Boats and more based on ESP-NOW

    21 parts16BSD-2-Clause
  • 2 layers51 × 43 mmEgg timer, the printed circuit board in 3D

    Egg timer

    MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board

    A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.

    25 parts13GPL-3.0
  • 4 layers29.9 × 32 mmModels heart rev1.1, the printed circuit board in 3D

    Models heart rev1.1

    KushlaVR/models-heart

    Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

    106 parts7GPL-3.0
  • 2 layers16.3 × 110.2 mmESP12E Smart Coaster, the printed circuit board in 3D

    ESP12E Smart Coaster

    atom-robotics-lab/ThermoGlow-Coaster

    This project is an ESP12E based Temperature Controlled Smart Coaster. The project uses the following: ESP12E Module 12 x WS2812B SMD LEDs MLX90614 Temperature Sensor I2C Module Power Bank Charge-Boost Module for…

    50 parts5
  • 2 layers41 × 28 mmAquarea, the printed circuit board in 3D

    Aquarea

    slqa/aquarea_esphome

    I used hardware serial on pins GPIO15/GPIO13 and one pin for RTS from a GPIO5 Mini ESP board. In a 'normal' situation, the ESP12E only listens to communication between the remote and the heat pump, so you can have…

    30 parts3

Questions

How big is the ESP12-E breakout board PCB?

It measures 56.3 × 32 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP12-E breakout board use?

18 parts, built around the ESP-12E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP12-E breakout board KiCad files?

From the cyberstormdotmu/ESP12E-breakout repository on GitHub, at the commit this page was made from: the board is ESP12-E breakout board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP12-E breakout board design in my own project?

Its repository states no licence, so its author keeps all rights: ask cyberstormdotmu before reusing the design.