Skip to the content
2 layers30 × 84 mmPlain, the printed circuit board in 3D

These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

Size
30 × 84 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
13
Pads
57
Tracks, vias
66, 56
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 May 2026
Updated
21 May 2026

Overview

Plain is an open-source printed circuit board by cuteboy0323, from the cuteboy0323/1590A repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 30 × 84 mm with 18 parts on 13 nets, routed with 66 tracks and 56 vias.

Its parts include 5 capacitors, 5 connectors, 4 resistors, 1 diode and 1 transistor.

README

README.md

Random guitar pedal board designs for 1590A enclosures

[!NOTE] This repository is no longer maintained in favor for GuitarPedal.

Electrical

These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch. I don't actually play guitar, but guitar pedal kits were fun to solder, and that then turned into "I want to actually understand what they do"...

[!NOTE] I'm not soldering wires together like some kind of animal --- thus PCBs designed in KiCad.

And not only don't I solder wires, I like surface-mount components. And not just because some newer stuff isn't even available in through-hole form any more.

Everything is designed to be "hand-soldered" --- although your definition of hand-soldering may differ from mine. The boards are double-sided, but surface mount components are only on one side, typically with the other side used only for connectors and the like.

I do these without a stencil. It's entirely doable, and I'm consciously limiting myself to fairly simple footprints

The design is split up into a "base board" and "effects boards", because the 1590A is pretty tight.

The base board should work with any of the effect boards, and is purely about the connectors and stomp switch with true bypass.

The base board does nothing to the signal (apart from the purely physical switching of the stomp switch), and only does some very basic reverse polarity protection and has some capacitors for the 9V power supply.

The effects boards are random "Linus is testing things he doesn't know anything about".

  • There's a random "Fuzz" board that I may still play around with, which just does some random signal clipping with a diode. I'm keeping that one around just as a starting point for other potential boards.

  • There's an "Octaver" board that is just a signal rectifier. I started out doing those with a op-amp based precision rectification circuit, but now it's a dual transistor discrete circuit instead.

    The rectification is objectively worse, but it's not like it made the sound any better, and the circuit is much more interesting.

  • There's a plain "clean boost" thing, which should be clean until the boosting starts to clip. Which happens pretty quickly since it's a pretty aggressive 25dB boost - assuming my simulation matches reality, which it might not do.

All of this has been tested and found lacking. But now my simulation is much better, and includes some real audio samples. That didn't make any of the circuits sound better, but once you realize that any sane modern guitar pedals are all digital, and that this is just to learn the basics of transistors etc, that's all good.

Mechanicals

These are all trivial two-layer boards. They could be single-sided with very little routing problem, but that would only complicate things for no gain.

It's not like I would ever want to even try to etch boards at home any more, because while I go for "large" components, that's still very relative. Etching boards is messy and doing it with the precision needed for smd is just too painful to be worth it. See below on components.

So just use JLCPCB or your favorite other board house.

Components

Connectors and potentiometers are typically from Tayda Electronics, with most of the actual common SMD components from kits or from Mouser.

For "random" SMD capacitors and resistors, get one of the kits. I can personally heartily recommend the Guanruixin kits from Amazon: there are 0805 and 1206 kits of both capacitors and resistors, and I love the packaging and labeling. Very good for organizing at a hobbyist level.

The AideTek kits are good too, but the Guanruixin ones are really compact for those "get all the values just in case" situations.

Then just go to Mouser or Digikey and buy cut tape for the values you use more of. You'll run out of the common resistors in the kits, but they are still worth having for the less usual ones and just for the organizing.

And things that are just a bit more specialized - like the the C0G caps in higher capacitances - you won't find in the kits.

Also, while I'm doing discrete components, I still consider "dual diodes" etc to be discrete. In fact I much prefer those for things like diodes and transistors when possible (and if you want matched pairs obviously make those a requirement - I realize some people do the manual matching, but that's not for me).

I've picked SOT-23-6 packages over SOT-363 or SOT-563 because I find that my limit for enjoying the soldering is at about the 1mm pin pitch. The 0.65mm or 0.5mm pitch stuff ends up being just annoying.

The resistors are all 0805 size, and capacitors are all over the place: smaller capacitors in the pF or nF range are 0805, bigger ones are 1206, and I ended up with 0.1uF C0G in 0704 because it was a common cap choice for both signal re-biasing and for op-amp bypassing, and doing 1206 was actually taking up noticeable amounts of board space in some cases.

Electro-mechanical:

  • Tayda A-6976: 1/4" thread lock panel mount mono jack CK635008

  • Tayda A-1848 etc: ALPHA 9mm PCB-mount potentiometers

  • Tayda A-4191: ALPHA 3PDT latching stomp switch.

  • Tayda A-3670 etc: 1M series mini toggle switches and the sub-mini 2M series for the side switch.

  • Wuerth 694106301002 9V DC power jack

  • Hammond 1590A enclosure. There are drill patterns that work here: "Tayda drill patterns"

Parts

18
QtyValueFootprintReferences
2AudioJack2_GroundMylib:CK-6.35J3, J4
2Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1, J2
10.47uFCapacitor_SMD:C_1206_3216MetricC4
1100kResistor_SMD:R_0805_2012MetricR1
1100uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1
110uFCapacitor_SMD:C_1206_3216MetricC2
11590AMylib:1590ABox1
11MEGResistor_SMD:R_0805_2012MetricR4
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
11uFCapacitor_SMD:C_1206_3216MetricC3
1220pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5
12k2Resistor_SMD:R_0805_2012MetricR2
13PDTMylib:3PDT-Stomp-Switch3PDT1
140VPackage_TO_SOT_SMD:SOT-23-3Q1
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_Wuerth_6941xx301002J5
1LEDLED_THT:LED_D5.0mmD1

More from cuteboy0323/1590A

8
  • 4 layers30 × 84 mmSTM32, the printed circuit board in 3D

    STM32

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    49 partsGPL-2.0
  • 2 layers30 × 84 mmBuffered, the printed circuit board in 3D

    Buffered

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    47 partsGPL-2.0
  • 2 layers30 × 62 mmCompressor, the printed circuit board in 3D

    Compressor

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    36 partsGPL-2.0
  • 2 layers30 × 84 mmDaisySeed, the printed circuit board in 3D

    DaisySeed

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    32 partsGPL-2.0
  • 2 layers30 × 55 mmOctaver, the printed circuit board in 3D

    Octaver

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    25 partsGPL-2.0
  • 2 layers30 × 62 mmBoost, the printed circuit board in 3D

    Boost

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    23 partsGPL-2.0
  • 2 layers30 × 62 mmFuzzy, the printed circuit board in 3D

    Fuzzy

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    13 partsGPL-2.0
  • 2 layers30 × 84 mmDaisySeed, the printed circuit board in 3D

    DaisySeed

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    7 partsGPL-2.0

Similar boards

  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993
  • 2 layers44 × 51.3 mm4272MAVcoder R4, the printed circuit board in 3D

    4272MAVcoder R4

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    18 parts915
  • 2 layers28.3 × 14.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    18 parts716GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 stepper driver, the printed circuit board in 3D

    L0 stepper driver

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    18 parts546MIT
  • 2 layersMooltipass, the printed circuit board in 3D

    Mooltipass

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    18 parts531
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0

Questions

How big is the Plain PCB?

It measures 30 × 84 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Plain use?

18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Plain KiCad files?

From the cuteboy0323/1590A repository on GitHub, at the commit this page was made from: the board is Base/Plain/Plain.kicad_pcb and its schematic Base/Buffered/Buffered.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Plain design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).