2 layers80 × 60 mm
Hushlog
rudy1904/hushlog
-channel, 24-bit data logger for small, slow signals: thermocouples, strain gauges, photodiodes and RTDs.
71 parts
2 layers37 × 50 mm
Nile amp
cpspacesystems/nile-board-ampAmplifier and ADC circuit for NILE
- Size
- 37 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 45
- Pads
- 191
- Tracks, vias
- 256, 103
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 3 Sep 2026
- Updated
- 8 Oct 2026
Overview
Nile amp is an open-source printed circuit board by cpspacesystems, from the cpspacesystems/nile-board-amp repository on GitHub. It is a 2-layer board of 37 × 50 mm with 63 parts on 45 nets, routed with 256 tracks and 103 vias.
It is built around the ADS1220IPW, 79L09U and JTD6206-25, with the MG78L05AT3, M2.5 and RJ45 among its other parts. Its parts include 27 capacitors, 10 resistors, 7 ICs, 4 connectors and 2 inductors. It belongs with the audio and music boards of this library.
Main components
6
ADS1220IPW
TSSOP-16-40℃~+125℃ 100nA 2.3V~5.5V 24 2kHz 2、4 500kHz~4.5MHz、4.096MHz 6LSB Built-in Built-in Built-in temperature sensor、Multiplexers、Integrated modulator SPI Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
79L09U
SOT-89-30℃~+150℃@(Tj) 1 1.7V 100mA 24V 45dB@(120Hz) 58uV 6mA 9V Fixed Negative SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSCBIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
JTD6206-25
SOT-23-40℃~+85℃ 1 2.5V 300mA 30uVrms 3uA 50dB 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJTDVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MG78L05AT3
SOT-23-3SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMegainUncategorisedM2.5
-0.45mm 2.5mm 2mm 5mm DIN934 Hex M2.5X0.45 Nickel plated Silver white - Hexagonal nutsShuntianHex Nut
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C12, C22, C25, C26, C27, C28, C29, C32, C33, C36, C39 |
| 5 | 10nF 1% | Capacitor_SMD:C_0603_1608Metric | C24, C30, C31, C34, C35 |
| 5 | PWR CHK | Capacitor_SMD:C_0201_0603Metric | JP1, JP3, JP4, JP5, JP7 |
| 4 | 1k ± 0.02 % | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C14, C15 |
| 4 | M2.5 | MountingHole:MountingHole_2.5mm_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 2601-1102 | Wago 2601 1102:26011102 | J1, J2, J3 |
| 3 | 330nF | Capacitor_SMD:C_0603_1608Metric | C13, C21, C38 |
| 2 | 100pF 1% | Capacitor_SMD:C_0201_0603Metric | C1, C2 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C23, C37 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R17 |
| 2 | 39uH | project_lcsc_parts:CMLF0504-390KTT | L3, L4 |
| 2 | 47 Ohm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R18 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 1 | 12 Ohm ± 0.01 % | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 280 Ohm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 79L09U | Package_TO_SOT_SMD:SOT-89-3 | U6 |
| 1 | ADS1220IPW | ADS1220:PW16 | U7 |
| 1 | DS8572 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | JTD6206-25 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | L78L09_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | MG78L05AT3 | Package_TO_SOT_SMD:SOT-23-3 | U4 |
| 1 | RJ45 | project_lcsc_parts:RJ45-TH_RJ-804-1-6 Yellow | J0 |
| 1 | TestPoint_Square | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | XINA851RGTR | INA851:VQFN16_RGT_TEX | U1 |
Questions
How big is the Nile amp PCB?
It measures 37 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nile amp use?
63 parts, built around the ADS1220IPW, 79L09U, JTD6206-25 and MG78L05AT3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nile amp KiCad files?
From the cpspacesystems/nile-board-amp repository on GitHub, at the commit this page was made from: the board is nile_amp.kicad_pcb and its schematic DVEC_RJ45.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nile amp design in my own project?
Its repository states no licence, so its author keeps all rights: ask cpspacesystems before reusing the design.
Similar boards
- 2 layers100 × 100 mm
LEOS efm
VIP-LES/leos-efm-pcb
This repository is the starting-point PCB template for VIP Lightning From the Edge of Space (LEOS). All LEOS modules should be spun off from this template so that every module begins with the standard Raspberry Pi Pico…
58 parts - 2 layers70 × 93.3 mm
- 2 layers64.8 × 53.2 mm
- 4 layers148 × 74 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
21 parts - 2 layers100 × 75 mm
Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 2 layers40.9 × 85 mm
Studio mic
Spirit532/studio_mic
A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone
63 parts150MIT - 2 layers65 × 56 mm
