Skip to the content
2 layers38.5 × 49.8 mmTHE BUTTON, the printed circuit board in 3D

A Macropad with one singular button. Used for an emergency button to close a tab when a parent is coming perhaps...

Size
38.5 × 49.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
28
Pads
54
Tracks, vias
26, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Apr 2026
Updated
6 May 2026

Overview

THE BUTTON is an open-source printed circuit board by couchpotatoe1234, from the couchpotatoe1234/THE-BUTTON repository on GitHub. It is a 2-layer board of 38.5 × 49.8 mm with 11 parts on 28 nets, routed with 26 tracks and 0 vias.

It is built around the WS2812B. Its parts include 4 capacitors, 2 ICs, 2 switches, 1 resistor and 1 diode. It belongs with the keyboards and input boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

THE-BUTTON

A Macropad with one singular button. Used for an emergency button to close a tab when a parent is coming perhaps... The Button is a simple macropad, with a simple, 3D printed frame, and a PCB that can be hand soldered. Screenshot 2026-05-02 at 7 42 19 AM It features a big, red button that can be pressed to a custom function (cmd-w, cmd-tab, cmd-t). I made this as a my firs wireless project, and my first project with a programmable LED. The PCB itself is rather simple, featuring some capacitors, and on/off switch, the switch, led, and the microcontroller, the Seeed Xiao ESP32-C3. Screenshot 2026-05-02 at 7 46 33 AM The Seeed module was chosen because it has such a small and compact size. The board stackup will look something in the end like this: Screenshot 2026-05-02 at 7 50 46 AM Onshape link: https://cad.onshape.com/documents/538be2b03248936ece9d33c1/w/1df8d390b01067d8bd89da4b/e/d1b17809ce85756e19fc8225?renderMode=0&uiState=69f60f8da8c5c45881890bfc BOM:

NamePurposeQuantityTotal Cost (USD)LinkDistributor
3D printed PartsThe Case10.00Anyone w/ a 3d printer
PCBWhere all the parts go on.14.00https://jlcpcb.comJLCPCB
Cherry MX blue switchThe main button11.75https://www.digikey.com/en/products/detail/cherry-americas-llc/MX2A-E1NB/21738397?gclsrc=aw.ds&gad_source=1&gad_campaignid=20243136172&gbraid=0AAAAADrbLlj5uJB4-UCn8Jcq0vyVTZ4ea&gclid=CjwKCAjwqazPBhALEiwAOuXqdCz_dlkZwhjgh_24bJ5zJWTk9k1aX59YHyKA8zXzAMtSSEA7STq8FBoCcMoQAvD_BwEDigkikey
WS2812BThe RGB LEDs, one extra because its SMD21.36https://www.digikey.com/en/products/detail/sparkfun-electronics/16347/11630204Digikey
100µF capacitorto stabilize voltage during WIFI peaks10.45https://www.digikey.com/en/products/detail/nichicon/UPW1H101MPD/589640?gclsrc=aw.ds&gad_source=1&gad_campaignid=20228387720&gbraid=0AAAAADrbLlil683OaSPSESvxX-Ci8hL8c&gclid=CjwKCAjw46HPBhAMEiwASZpLRPG64ffxjeE-H9QIviqLggNZI-giQukbrM7XxPDN5vtHO0DAxoICaBoCgp0QAvD_BwEDigikey
1µF capacitorTo stabilize the LDO21.60https://www.digikey.com/en/products/detail/murata-electronics/RDER72A105K2M1H03A/4771353Digikey
0.1µF capacitorfor the LED10.28https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/K104K15X7RF5TL2/286538Digikey
330Ω ResistorFor the LED10.10https://www.digikey.com/en/products/detail/stackpole-electronics-inc/CFM12JT330R/1741936Digikey
SPST slide switchfor on & off-ing14.21https://www.digikey.com/en/products/detail/c-k/L101011ML04Q/3753550Digikey
3xAAA battery holderTo hold the batteries11.79https://www.digikey.com/en/products/detail/keystone-electronics/2480/303825?gclsrc=aw.ds&gad_source=1&gad_campaignid=20243136172&gbraid=0AAAAADrbLlgQYe09PPf0O7EKtdKZZmIhf&gclid=CjwKCAjw46HPBhAMEiwASZpLRHULFnkGrp_fAm7Zs8xUfdqgpxbOTEhgJAsfNiPpHGBhjguWk6aUqRoCTKYQAvD_BwEDigikey
Low Dropout Regulator MCP1700(1 extra) To control the voltage21.00https://www.digikey.com/en/products/detail/microchip-technology/MCP1700-1202E-TO/651107Digikey
7 pin headersto connect the MCU to the PCB20.20https://www.digikey.com/en/products/detail/adam-tech/PH1-07-UA/9830505Digikey
Seeed Xiao Esp32-C3The MCU14.99https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/113991054/16652880Digikey

Parts

11
QtyValueFootprintReferences
21uFCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC1, C2
10.1uF0.1uF_Capacitor:K104K15X7RF5TL2_VISC4
1100uF100uF_Capacitor:PCAP_8x11_5-THRU-ELECT_NCAC3
1330ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1Battery_CellConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1MCP1700x-120xxTOPackage_TO_SOT_THT:TO-92_InlineU2
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1
1SW_SPSTSLIDE_SWITCH:SW3x1_L101011ML04Q_CNKSW3
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1
1XIAO-ESP32-C3-DIPNew_XIAO_Series_Footprints:XIAO-ESP32-C3-DIPU1

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the THE BUTTON PCB?

It measures 38.5 × 49.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the THE BUTTON use?

11 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the THE BUTTON KiCad files?

From the couchpotatoe1234/THE-BUTTON repository on GitHub, at the commit this page was made from: the board is THE BUTTON PCB/THE BUTTON.kicad_pcb and its schematic THE BUTTON PCB/THE BUTTON.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the THE BUTTON design in my own project?

Its repository states no licence, so its author keeps all rights: ask couchpotatoe1234 before reusing the design.