4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
4 layers100 × 67.5 mm
DC LISN
cortexer/SCAR001_DC_LISN5µH DC LISN for conducted EMI measurements
- Size
- 100 × 67.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 363
- Nets
- 15
- Pads
- 449
- Tracks, vias
- 79, 0
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Dec 2017
- Updated
- 30 Dec 2017
Overview
DC LISN is an open-source printed circuit board by cortexer, from the cortexer/SCAR001_DC_LISN repository on GitHub. It is a 4-layer board of 100 × 67.5 mm with 363 parts on 15 nets, routed with 79 tracks and 0 vias.
It is built around the 1N4148W. Its parts include 18 resistors, 8 crystals, 7 capacitors and 6 inductors. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdSCAR001_DC_LISN
5µH DC LISN for conducted EMI measurements
This is a simple 5µH DC LISN design made in KiCad. A "Line Impedance Stabilization Network" (LISN) is used for conducted EMC measurements. It is a partial implementation of Linear Technology's DC2130A. It features a -10dB attenuator and provides AC coupling to the spectrum analyzer using 50 ohm transmission lines through an SMA connector.
It is a very simple design. For some more information look at the schematic.
Parts
363| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1.1uH | MST_Lib:L_Wuerth_744314110 | L1, L2, L3, L4, L6 |
| 5 | 261R | MST_Lib:R_0603 | R5, R8, R11, R12, R13 |
| 4 | 1N4148W | MST_Lib:V_SOD-123 | V1, V2, V3, V4 |
| 4 | 432R | MST_Lib:R_0603 | R9, R10, R14, R15 |
| 4 | 575-4 | MST_Lib:X_Keystone_575-4 | X4, X5, X6, X7 |
| 4 | MountingHole | MST_Lib:M_MountingHole_3.5mm_Pad_Via | M1, M2, M3, M4 |
| 4 | TEST | MST_Lib:TP_MillMax_2501 | TP2, TP3, TP4, TP5 |
| 3 | 100nF | MST_Lib:C_1206 | C5, C6, C7 |
| 2 | 470nF | MST_Lib:C_0805 | C3, C4 |
| 2 | B8B-EH-A | MST_Lib:X_JST_EH_B08B-EH-A_08x2.50mm_Straight | X2, X3 |
| 2 | PCB.SMAFRA.HT | MST_Lib:X_SMA_THT_Jack_Straight_PCB.SMAFRA.HT | X1, X8 |
| 2 | TEST | MST_Lib:TP_1mm | TP1, TP6 |
| 1 | 12.1R | MST_Lib:R_0603 | R3 |
| 1 | 18.2R | MST_Lib:R_0603 | R16 |
| 1 | 1mH | MST_Lib:L_1210 | L5 |
| 1 | 243R | MST_Lib:R_0603 | R4 |
| 1 | 274R | MST_Lib:R_0603 | R6 |
| 1 | 27uF | MST_Lib:C_Alu_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 30.1R | MST_Lib:R_0603 | R7 |
| 1 | 4.7uF | MST_Lib:C_1210 | C1 |
| 1 | 562R | MST_Lib:R_0603 | R17 |
| 1 | 619R | MST_Lib:R_0603 | R18 |
| 1 | 825R | MST_Lib:R_0603 | R1 |
| 1 | 909R | MST_Lib:R_0603 | R2 |
The 53 most common of 363 parts.
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
Questions
How big is the DC LISN PCB?
It measures 100 × 67.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DC LISN use?
363 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DC LISN KiCad files?
From the cortexer/SCAR001_DC_LISN repository on GitHub, at the commit this page was made from: the board is DC_LISN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DC LISN design in my own project?
Its repository states no licence, so its author keeps all rights: ask cortexer before reusing the design.