2 layers128 × 80 mm
2 layers40.6 × 34.3 mm
LightFlicker
coolhatguy/LightFlickerProject utilizing Kicad and PCB creation. Written in the Arduino IDE
- Size
- 40.6 × 34.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 26
- Pads
- 49
- Tracks, vias
- 88, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Oct 2017
- Updated
- 4 Oct 2017
Overview
LightFlicker is an open-source printed circuit board by coolhatguy, from the coolhatguy/LightFlicker repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 40.6 × 34.3 mm with 10 parts on 26 nets, routed with 88 tracks and 25 vias.
It is built around the LM317AT. Its parts include 5 connectors, 2 capacitors, 1 resistor and 1 IC.
Main components
1Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_01X12 | Socket_Strips:Socket_Strip_Straight_1x12_Pitch2.54mm | P1, P4 |
| 1 | 0.1 uF | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 1 uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | Button | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | P5 |
| 1 | CONN_02X04 | Socket_Strips:Socket_Strip_Straight_2x04_Pitch2.54mm | P2 |
| 1 | LM317AT | Power_Integrations:TO-220 | U1 |
| 1 | MG995 SERVO | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | P3 |
| 1 | POT_TRIM | Potentiometers:Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV1 |
| 1 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Questions
How big is the LightFlicker PCB?
It measures 40.6 × 34.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightFlicker use?
10 parts, built around the LM317AT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightFlicker KiCad files?
From the coolhatguy/LightFlicker repository on GitHub, at the commit this page was made from: the board is LightFlicker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightFlicker design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers224.2 × 153.7 mm
- 2 layers84 × 69.5 mm
Ref fixa v02
agaelema/Precision-Voltage-Reference
A simple and efficient instrumentation project of a Precision Voltage Reference. The idea of this project appeared with my passion by the instrumentation and my need of some reference to calibrate my projects involving…
69 parts7MIT - 2 layers61.8 × 60 mm
Levitador
jcsombria/OpenHardwareLabs
Open source and open hardware virtual and remote laboratories
20 parts1 - 2 layers80 × 50 mm
Blitzortung AS3935
patkan/lightning-detector
Lightning Detector ethernet sensor node and server based on AS3935 - this project is discontinued
81 parts1GPL-2.0 - 2 layers100 × 50 mm
Ad8307-log amp
benishor/w7zoi-sa-ad8307-log-amp
Kicad files for the new AD8307 log amp for W7ZOI spectrum analyzer.
52 partsMIT - 2 layers79.4 × 91.6 mm
Loconet
dirkjankrijnders/lnet-iface-hub
Modular hub/frontpanel/microcontroller interface PCB's
38 parts - 2 layers100 × 75 mm
Sousvide
gregorv/sousvide
Hardware and software for an ATmega8 based Sous-Vide temperature controller
66 partsGPL-3.0