2 layers128 × 80 mm
2 layers61.8 × 60 mm
Levitador
jcsombria/OpenHardwareLabs1Open source and open hardware virtual and remote laboratories
- Size
- 61.8 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 36
- Pads
- 67
- Tracks, vias
- 73, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Sep 2017
- Updated
- 18 Sep 2017
Overview
Levitador is an open-source printed circuit board by jcsombria, from the jcsombria/OpenHardwareLabs repository on GitHub. It is a 2-layer board of 61.8 × 60 mm with 20 parts on 36 nets, routed with 73 tracks and 2 vias.
It is built around the LM317AT and IRF540N. Its parts include 10 connectors, 3 resistors, 2 capacitors, 1 IC and 1 diode.
Main components
2
LM317AT
TO-220-40℃~+125℃ 0.003%Vout 1 1.25V~37V 1.5A 40V 80dB@(120Hz) Adjustable Over Current Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
README
README.mdOpenHardwareLabs
Open source and open hardware virtual and remote laboratories
Introduction
This repository is a container for open-source/open-hardware remote and virtual labs.
Currently available labs:
- Air Levitation System
Air Levitation System
To build the air levitation system:
-
Beaglebone Black board setup
- Verify you can boot your BBB and you have a working version of Node.js.
- Download and install the RIP-server (https://github.com/UNEDLabs/rip-js-server)
-
Build the PCB circuit (design files are available in the folder 'AirLevitation/KiCad', and the documentation in 'AirLevitation/doc').
-
Build the structure
- Print all the structural parts (the .stl files contained in the folder 'AirLevitation/output').
- Mount the structure and make the connections between the sensors, actuators, circuitry and beaglebone as shown in the schematic.
-
EjsS
- Download EjsS in your PC or laptop, and open the lab application in EjsS.
- Press play on EjsS to start the remote lab.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | Socket_Arduino_Nano:1pin_Nano | P3, P4, P5, P6 |
| 3 | R | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1, R2, R3 |
| 2 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P7, P8 |
| 2 | CP | Capacitors_ThroughHole:C_Radial_D5_L11_P2.5 | C1, C2 |
| 1 | Analog | Socket_Arduino_Nano:Socket_Strip_Arduino_1x15 | P2 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P9 |
| 1 | D | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
| 1 | Digital | Socket_Arduino_Nano:Socket_Strip_Arduino_1x15 | P1 |
| 1 | IRF540N | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q1 |
| 1 | LM317AT | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U1 |
| 1 | POT | Potentiometers:Potentiometer_Trimmer-Suntan-TSR-3386P | RV1 |
| 1 | Screw_Terminal_1x02 | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | J1 |
The 19 most common of 20 parts.
Similar boards
- 2 layers224.2 × 153.7 mm
- 2 layers84 × 69.5 mm
Ref fixa v02
agaelema/Precision-Voltage-Reference
A simple and efficient instrumentation project of a Precision Voltage Reference. The idea of this project appeared with my passion by the instrumentation and my need of some reference to calibrate my projects involving…
69 parts7MIT - 2 layers80 × 50 mm
Blitzortung AS3935
patkan/lightning-detector
Lightning Detector ethernet sensor node and server based on AS3935 - this project is discontinued
81 parts1GPL-2.0 - 2 layers100 × 50 mm
Ad8307-log amp
benishor/w7zoi-sa-ad8307-log-amp
Kicad files for the new AD8307 log amp for W7ZOI spectrum analyzer.
52 partsMIT - 2 layers40.6 × 34.3 mm
LightFlicker
coolhatguy/LightFlicker
Project utilizing Kicad and PCB creation. Written in the Arduino IDE
10 partsApache-2.0 - 2 layers79.4 × 91.6 mm
Loconet
dirkjankrijnders/lnet-iface-hub
Modular hub/frontpanel/microcontroller interface PCB's
38 parts - 2 layers100 × 75 mm
Sousvide
gregorv/sousvide
Hardware and software for an ATmega8 based Sous-Vide temperature controller
66 partsGPL-3.0
Questions
How big is the Levitador PCB?
It measures 61.8 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Levitador use?
20 parts, built around the LM317AT and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Levitador KiCad files?
From the jcsombria/OpenHardwareLabs repository on GitHub, at the commit this page was made from: the board is AirLevitation/src/KiCad/levitador.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Levitador design in my own project?
Its repository states no licence, so its author keeps all rights: ask jcsombria before reusing the design.