
3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos

This is an open source replica of the DTK PEM-0039U, and its main target was to reverse engineer the pinout and functionality of the UMC 82C491 chipset, for which there are no datasheets online.
UMC AT is an open-source printed circuit board by computerguy096, from the computerguy096/DTK-386-replica repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 175 × 220.4 mm with 179 parts on 433 nets, routed with 14,187 tracks and 707 vias.
It is built around the 74LS245SC and 74LS00SC. Its parts include 34 resistors, 27 capacitors, 21 ICs, 8 connectors and 5 inductors.
This is an open source replica of the DTK PEM-0039U, and its main target was to reverse engineer the pinout and functionality of the UMC 82C491 chipset, for which there are no datasheets online.
Theoretically, it should be fully functional if one were to assemble this, but I do not guarantee there won't be bugs from my side or from the original designers which made it 30+ years ago. The aim was to 100% reproduce the original PCB, with all the original components and footprints, despite the questionable trace routing in certain places.
The gerber files can be found at /gerber.
Special thanks to:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R10, R11, R12, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +16 |
| 25 | 100nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | BC1, BC2, BC10, BC11, BC12, BC13, BC14, BC15, BC16, BC18, BC19, BC20, BC21, BC22, BC23, BC24 +9 |
| 12 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5, C18, C19, C20, C21, C22, C23, C24 |
| 9 | 4.7K | Resistor_THT:R_Array_SIP9 | RP1, RP5, RP6, RP7, RP8, RP9, RP10, RP13, RP14 |
| 8 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C9, C13, C14, C15, C25, C26, C27, C28 |
| 8 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x30_P2.54mm_Vertical | SIM1, SIM2, SIM3, SIM4, SIM5, SIM6, SIM7, SIM8 |
| 7 | 33R | Resistor_THT:R_Array_SIP8 | RN1, RN2, RN3, RN4, RN5, RN6, RN7 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.7mm_Pad_TopBottom | H1, H2, H3, H4, H5, H6 |
| 5 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | CR1, CR2, CR3, CR4, CR5 |
| 5 | 4.7K | Resistor_THT:R_Array_SIP8 | RP2, RP3, RP4, RP11, RP12 |
| 5 | Bus_ISA_16bit | umc:ISA16 | ISA1, ISA3, ISA4, ISA5, ISA6 |
| 5 | CY62256-70PC | Package_DIP:DIP-28_W7.62mm | U6, U10, U11, U12, U13 |
| 5 | FerriteBead | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L1, L2, L3, L4, L5 |
| 3 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U15, U16, U17 |
| 3 | C | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C8, C10, C11 |
| 3 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP8 |
| 2 | 10pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C6, C7 |
| 2 | 2N3904 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | Q1, Q3 |
| 2 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U14, U21 |
| 2 | C | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C12, C16 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3, JP4 |
| 1 | 10R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 14.318MHz | Crystal:Crystal_HC49-U_Horizontal | Y2 |
| 1 | 1A | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | F1 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm | U18 |
| 1 | 2N3906 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | Q2 |
| 1 | 3.6V NiCd | umc:BATT | BT1 |
| 1 | 32.768KHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 33R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R27 |
| 1 | 387 PRESENT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP6 |
| 1 | 4069 | Package_DIP:DIP-14_W7.62mm | U9 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 80386 | umc:PGA-132 | U2 |
| 1 | 80387 | umc:PGA-68 | U3 |
| 1 | 82C491 | umc:QFP-208 | U4 |
| 1 | 82C493 | umc:QFP-100 | U20 |
| 1 | AV9107 | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | Am386DX | umc:QFP-132 | U23 |
| 1 | Bus_ISA_8bit | umc:ISA8 | ISA2 |
| 1 | Cx87DLC | Package_QFP:LQFP-80_14x14mm_P0.65mm | U22 |
| 1 | KEY LOCK | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SPEAKER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | TURBO LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | TURBO SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | V+ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | ~ | Package_DIP:DIP-40_W15.24mm | U19 |
| 1 | ~ | umc:KB_DIN5 | J8 |
| 1 | ~ | umc:ATPWR | J7 |

mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos

Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

tjboldt/Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O

danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts

tjboldt/ProDOS-ROM-Drive
A bootable 1 MB solid state disk for Apple ][ computers


hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
It measures 175 × 220.4 mm and has 4 copper layers, 1.61 mm thick.
179 parts, built around the 74LS245SC and 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the computerguy096/DTK-386-replica repository on GitHub, at the commit this page was made from: the board is kicad/UMC-AT.kicad_pcb and its schematic kicad/UMC-AT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).