

Multi Expansion
Open source FPP PB16 Pixel Controller
- Size
- 91.1 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 66
- Pads
- 248
- Tracks, vias
- 409, 135
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Aug 2019
- Updated
- 5 Oct 2026
Overview
Multi Expansion is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 91.1 × 100 mm with 44 parts on 66 nets, routed with 409 tracks and 135 vias.
It is built around the AM26C31QD, SN74HCT245N and SR215C104KARTR1, with the 4608X-102-330LF, RJ45 and CF14JT1K00 among its other parts. Its parts include 13 connectors, 8 fuses, 3 capacitors, 3 ICs and 3 diodes.
Main components
10AM26C31QD
SOIC-16-40℃~+125℃ 1 100uA 20mA 20mA 4 4.5V~5.5V 7ns@5V Tri-State Unidirectional SOIC-16 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74HCT245N
DIP-20-40℃~+85℃ 1 14ns@5.5V,50pF 4.5V~5.5V 6mA 6mA 74HCT 8 80uA Bidirectional Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSR215C104KARTR1
插件Multilayer Ceramic Capacitors MLCC - LeadedKyocera AVX4608X-102-330LF
SIP-8Resistor Networks & ArraysBournsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedCF14JT1K00
插件,D2.3xL6mm-400ppm/℃~0ppm/℃ -55℃~+155℃ 1kΩ 250mW Carbon Film Resistor ±5% 插件,D2.3xL6mm Through Hole Resistors ROHSStackpole Electronics (SEI)Through Hole ResistorsWP3A8GD
插件,D=3mm2.2V 20mA 20mcd 50° 565nm 568nm Emerald Green Green Lens 插件,D=3mm LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteSBH11-PBPC-D20-ST-BK
直插,P=2.54mmStraight,P=2.54mm Wire To Board Connector ROHSSullins Connector SolutionsWire To Board ConnectorSB5100-T
DO-201AD-65℃~+150℃ 1 Independent 100V 150A 500uA@100V 5A 800mV@5A DO-201AD Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes302-S241
插件Wire To Board ConnectorOn-Shore Tech
README
PB16_2_PI/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
PB16-2-PI
This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.
To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 3544-2 | Scotts:FUSE_3544-2 | F1, F2, F3, F4, F5, F6, F7, F8 |
| 3 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C2, C3 |
| 2 | 120 | Resistor_THT:R_Array_SIP8 | RN3, RN4 |
| 2 | 33 | Resistor_THT:R_Array_SIP8 | RN1, RN2 |
| 2 | AM26C31 | Package_DIP:DIP-16_W7.62mm | U1, U2 |
| 2 | RJ45 | Scotts:RJ45_Amphenol_54602-x08_Horizontal | J10, J11 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V LED | LED_THT:LED_D3.0mm_Clear | D3 |
| 1 | Expansion Header | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J12 |
| 1 | LOGO | Scotts:chewi_15 | G*** |
| 1 | Power In | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type701_RT11L02HGLU_1x02_P6.35mm_Horizontal | J9 |
| 1 | Power In | Barrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P9.5MM | TB1 |
| 1 | SB5100-T | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D1 |
| 1 | SN74HCT245N | SN74HCT245N:SN74HCT245N | U3 |
| 1 | String1 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J1 |
| 1 | String2 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J2 |
| 1 | String3 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J3 |
| 1 | String4 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J4 |
| 1 | String5 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J5 |
| 1 | String6 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J6 |
| 1 | String7 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J7 |
| 1 | String8 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J8 |
| 1 | VIN LED | LED_THT:LED_D3.0mm_Clear | D2 |
| 1 | v4 Input | 302-S241:OST_302-S241 | J13 |
The 38 most common of 44 parts.
More from computergeek1507/PB_16
12- 2 layers142.1 × 106 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 99.9 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 93 mm

- 2 layers151.1 × 93.4 mm

- 2 layers148.1 × 102.6 mm

- 2 layers148.6 × 76.4 mm

- 2 layers83.2 × 71.4 mm

- 2 layers100 × 90.4 mm

- 2 layers148.6 × 75.5 mm

- 2 layers90.1 × 71.4 mm

Similar boards
- 2 layers148.6 × 75.5 mm

- 2 layers22 × 56 mm

- 2 layers50 × 50 mm

- 4 layers100 × 54 mm

- 2 layers

- 2 layers100.4 × 56.8 mm

ALU
Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer
37 partsCERN-OHL-P-2.0 - 2 layers147.3 × 154.4 mm

- 2 layers33.5 × 37 mm

SumpPump
aidanogr/SumpPumpActivityMonitorPCB
Transforms 7.7Vrms transformed signal from sump pump and converts it to 3VAC to be read by GPIO
9 partsGPL-3.0
Questions
How big is the Multi Expansion PCB?
It measures 91.1 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multi Expansion use?
44 parts, built around the AM26C31QD, SN74HCT245N, SR215C104KARTR1 and 4608X-102-330LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multi Expansion KiCad files?
From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is Multi_Expansion/Multi_Expansion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multi Expansion design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.