
Control
Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

PCB version of Ben Eaters 8-bit breadboard computer
ALU is an open-source printed circuit board by Robert-Riordan-UCD, from the Robert-Riordan-UCD/8_Bit_CPU_PCB repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 100.4 × 56.8 mm with 37 parts on 71 nets, routed with 405 tracks and 3 vias.
It is built around the SN74HCT245N, CD74HCT283E and SN74F86N. Its parts include 10 resistors, 10 diodes, 8 ICs, 4 connectors and 1 capacitor. It belongs with the retro computing and games boards of this library.
This is my version of Ben Eaters 8-bit breadboard SAP-1 CPU, converted to a PCB. I have made some minor changes as I could not find all of the components as listed in Ben's part list.
https://youtube.com/shorts/QNcSWgcGv9o?si=QzoUVq9Kj8X1f4Rs
CERN Open Hardware Licence Version 2 - Permissive
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 220 | _DownloadFootprints:CF_series_Resistors_THT | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 10 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 2 | CD74HCT283E | _DownloadFootprints:4bit_full_adder | U4, U5 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | SN74F86N | _DownloadFootprints:4x_xor | U1, U2 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | Dual D FF | _DownloadFootprints:2x_D_FF | U8 |
| 1 | SN74HCT245N | _DownloadFootprints:8x_tristate_transceiver | U3 |
| 1 | ~ | Package_DIP:DIP-14_W7.62mm | U7 |
| 1 | ~ | 8BitCPUFootprints:4x_and | U6 |
The 33 most common of 37 parts.

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.







hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 100.4 × 56.8 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the SN74HCT245N, CD74HCT283E and SN74F86N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Robert-Riordan-UCD/8_Bit_CPU_PCB repository on GitHub, at the commit this page was made from: the board is ALU/ALU.kicad_pcb and its schematic ALU/ALU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).