Skip to the content
12345678910111213141516

CD74HCT283E

Texas InstrumentsExtended

-55℃~+125℃ 4 4.5V~5.5V Full Adder PDIP-16 Specialty Logic ROHS

Part id
ti/CD74HCT283E
Category
Specialty Logic
Package
PDIP-16
Pins
16
In stock
22 at JLCPCB (C1523488)
Used on
3 open-source boards

Overview

The CD74HCT283E is a specialty Logic made by Texas Instruments in a PDIP-16 package with 16 pins. -55℃~+125℃ 4 4.5V~5.5V Full Adder PDIP-16 Specialty Logic ROHS.

PCBKit's library has its KiCad symbol (74xx:74LS283, from KiCad's library) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 22 are in stock at JLCPCB (part C1523488). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1S22B23A24S15A16B17C08GND9C410S411B412A413S314A315B316VCC
74xx:74LS283From KiCad's library

Footprint

12345678910111213141516
Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

From the datasheet

10
Supply, least
4.5 V · VCC, HCT recommended operating, min · p. 1
Supply, most
5.5 V · VCC, HCT recommended operating, max · p. 1
Supply, absolute maximum
7 V · VCC, absolute maximum · p. 4
Works from
-55 °C · TA, operating ambient, min · p. 4
Works up to
125 °C · TA, operating ambient, max · p. 4
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 4
Takes working
160 µA · VCC = 5.5 V, inputs at VCC or GND, −55 to 125 °C, max · p. 5
A pin gives at most
25 mA · source or sink per output pin, absolute maximum · p. 4
Junction to air (D (SOIC))
73 K/W · junction-to-ambient thermal resistance · p. 4
Junction to air (N (PDIP))
67 K/W · junction-to-ambient thermal resistance · p. 4

Open-source boards using it

3
  • 2 layers114.3 × 99.7 mmI281 alu norless, the printed circuit board in 3D

    I281 alu norless

    brandtdamman/i281e-cpu

    Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

    70 parts1
  • 2 layers92.7 × 60.3 mmI281 programcounter, the printed circuit board in 3D

    I281 programcounter

    brandtdamman/i281e-cpu

    Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

    35 parts1
  • 2 layers100.4 × 56.8 mmALU, the printed circuit board in 3D

    ALU

    Robert-Riordan-UCD/8_Bit_CPU_PCB

    PCB version of Ben Eaters 8-bit breadboard computer

    37 partsCERN-OHL-P-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CD74HCT283E?

Yes. The symbol is 74xx:74LS283 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CD74HCT283E?

PDIP-16, with 16 pins. Its footprint is drawn on this page.

Where is the CD74HCT283E datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the CD74HCT283E?

JLCPCB lists it as part C1523488, with 22 in stock; the sellers' links on this page open their listings.

What can replace the CD74HCT283E?

Parts like it in the library: the SN74HC283N(LX) by lingxingic, the SN74LS283N(LX) by lingxingic, the XD74LS283 by XINLUDA and the SN74LS31N by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CD74HCT283E?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.