Skip to the content
2 layers54 × 11 mmExp Filter, the printed circuit board in 3D

Open source FPP PB16 Pixel Controller

Size
54 × 11 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
23
Pads
72
Tracks, vias
37, 17
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Aug 2019
Updated
5 Oct 2026

Overview

Exp Filter is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 54 × 11 mm with 17 parts on 23 nets, routed with 37 tracks and 17 vias.

It is built around the RC0603FR-0710KL and SFH11-PBPC-D20-ST-BK. Its parts include 16 resistors and 1 connector.

Main components

2

README

PB16_2_PI/README.md

Copyright and Disclaimer

Copyright: Scott Hanson

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

PB16-2-PI

This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.

To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Image of PI Adapter

Parts

17
QtyValueFootprintReferences
1610KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
1Expansion HeaderConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1

More from computergeek1507/PB_16

12
  • 2 layers142.1 × 106 mmPi CM4 16, the printed circuit board in 3D

    Pi CM4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    118 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    116 parts78
  • 2 layers142.1 × 99.9 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    112 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers142.1 × 93 mmPi Zero W 16, the printed circuit board in 3D

    Pi Zero W 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers151.1 × 93.4 mmESP32-P4 16, the printed circuit board in 3D

    ESP32-P4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    99 parts78
  • 2 layers148.1 × 102.6 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    90 parts78
  • 2 layers148.6 × 76.4 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    83 parts78
  • 2 layers83.2 × 71.4 mmReceiver Out, the printed circuit board in 3D

    Receiver Out

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    68 parts78
  • 2 layers100 × 90.4 mmPi Zero 24 Diff, the printed circuit board in 3D

    Pi Zero 24 Diff

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    62 parts78
  • 2 layers148.6 × 75.5 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    59 parts78
  • 2 layers90.1 × 71.4 mmWingsStation, the printed circuit board in 3D

    WingsStation

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    57 parts78

Similar boards

  • 4 layers55.8 × 58.4 mmEDP Converter, the printed circuit board in 3D

    EDP Converter

    brendena/SN65DSI86_hat

    V1.1 - added a external clock, routed test to ground

    67 parts9
  • 4 layers55.7 × 72.2 mmEDP Converter, the printed circuit board in 3D

    EDP Converter

    brendena/SN65DSI84_hat

    54 parts1
  • 2 layers35.5 × 90.9 mmDashboard, the printed circuit board in 3D

    Dashboard

    olin-electric-motorsports/olin-electric-motorsports

    OEM Monorepo

    65 parts14
  • 4 layers16.9 × 119.4 mmOrbit, the printed circuit board in 3D

    Orbit

    earthtojake/text-to-cad

    Design physical products with AI

    182 parts26kMIT
  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 4 layers85 × 56 mmAnthC, the printed circuit board in 3D

    AnthC

    Anthilla/AnthC

    Anthilla AnthC Board

    211 parts40
  • 4 layers110 × 64 mmSYCL Badge 2024, the printed circuit board in 3D

    SYCL Badge 2024

    ZigEmbeddedGroup/sycl-badge

    The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/

    145 parts39
  • 4 layers79 × 39.1 mmConnector pcb, the printed circuit board in 3D

    Connector pcb

    festlv/mso5000-logic-probe

    Cheap logic probe for Rigol MSO5000-series oscilloscopes

    39 parts37MIT

Questions

How big is the Exp Filter PCB?

It measures 54 × 11 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Exp Filter use?

17 parts, built around the RC0603FR-0710KL and SFH11-PBPC-D20-ST-BK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Exp Filter KiCad files?

From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is Exp_Filter/Exp_Filter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Exp Filter design in my own project?

Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.