

BBB 16
Open source FPP PB16 Pixel Controller
- Size
- 148.8 × 116.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 171
- Pads
- 530
- Tracks, vias
- 915, 251
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Aug 2019
- Updated
- 5 Oct 2026
Overview
BBB 16 is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 148.8 × 116.9 mm with 116 parts on 171 nets, routed with 915 tracks and 251 vias.
It is built around the SN74HCT245N, AM26C31MDREP and 24LC256T-I/MS, with the CN34J330CT, CRGCQ0603F120R and RC0603FR-0710KL among its other parts. Its parts include 35 resistors, 28 connectors, 18 fuses, 7 capacitors and 7 ICs.
Main components
12SN74HCT245N
DIP-20-40℃~+85℃ 1 14ns@5.5V,50pF 4.5V~5.5V 6mA 6mA 74HCT 8 80uA Bidirectional Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversAM26C31MDREP
SOIC-16-55℃~+125℃ 4.5V~5.5V SOIC-16 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs24LC256T-I/MS
MSOP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C MSOP-8 EEPROM ROHSMicrochip TechnologyEEPROMCN34J330CT
1206Resistor Networks & ArraysCAL-CHIP ELECTRONICS, INC.CRGCQ0603F120R
0603-55℃~+155℃ 100mW 120Ω Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountRC0603FR-0710KL
UncategorisedUnknown makerRMCF0603FT100R
0603-55℃~+155℃ 100mW 100Ω 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRC0603FR-071KL
UncategorisedUnknown makerRC0603JR-074K7L
UncategorisedUnknown makerRT0603BRD07100KL
0603-55℃~+155℃ 100kΩ 100mW 75V Thin Film Resistor ±0.1% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountUWX1C101MCL1GB
SMD,D6.3xL5.4mm-40℃~+85℃ 100uF 129mA@10kHz 16V 2000hrs@85℃ Polarized ±20% SMD,D6.3xL5.4mm Aluminum Electrolytic Capacitors - SMD ROHSNichiconAluminum Electrolytic Capacitors - SMDECA-1HM221
插件,D10xL12.5mm-40℃~+85℃ 10mm 12.5mm 2000hrs@85℃ 220uF 50V 5mm 680mA@10kHz ±20% 插件,D10xL12.5mm Aluminum Electrolytic Capacitors - Leaded ROHSPanasonicAluminum Electrolytic Capacitors - Leaded
README
PB16_2_PI/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
PB16-2-PI
This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.
To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 3544-2 | Scotts:FUSE_3544-2 | F1, F2, F3, F4, F5, F6, F7, F10, F11, F12, F13, F14, F15, F16, F17, F18 +2 |
| 16 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34 |
| 7 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R15, R16, R17, R18 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7 |
| 5 | MountingHole | MountingHole:MountingHole_3.7mm | H1, H2, H3, H4, H5 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R12, R35 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R11 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 680 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R13 |
| 2 | AM26C31 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U7 |
| 2 | SN74HCT245N | SN74HCT245NSR:SN74HCT245NSR | U3, U4 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.4_Nichicon | C2 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 24L256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | 5V LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | Aux Pwr | MKDS1_2-3.81:PHOENIX_MKDS1_2-3.81 | J27 |
| 1 | BEAGLEBONEBLACK | Scotts:BEAGLEBONEBLACK | U1 |
| 1 | DMP3056L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DMX1 RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J20 |
| 1 | DMX2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J22 |
| 1 | DMX_LOR_Select | Scotts:SW_CK_JS202011CQN_DPDT_Straight | SW6 |
| 1 | Down BTN | Scotts:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW3 |
| 1 | Expansion Header | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J29 |
| 1 | GPIO | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J19 |
| 1 | LOGO | Scotts:chewi_15 | G*** |
| 1 | Left BTN | Scotts:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | OLED | Scotts:OLED-SSD1306-128X64-I2C-THT_2HOLE | J26 |
| 1 | PIN3 | Scotts:SolderJumper-3_P1mm_Bridged12 | JP1 |
| 1 | PIN4 | Scotts:SolderJumper-3_P1mm_Bridged23 | JP2 |
| 1 | PWR BTN | Scotts:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW5 |
| 1 | Power In Left | Barrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P9.5MM | J17 |
| 1 | Power In Right | Barrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P9.5MM | J18 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J21 |
| 1 | RTC Conn | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J25 |
| 1 | Right BTN | Scotts:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW4 |
| 1 | String1 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J1 |
| 1 | String10 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J10 |
| 1 | String11 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J11 |
| 1 | String12 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J12 |
| 1 | String13 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J13 |
| 1 | String14 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J14 |
| 1 | String15 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J15 |
| 1 | String16 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J16 |
| 1 | String2 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J2 |
| 1 | String3 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J3 |
| 1 | String4 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J4 |
| 1 | String5 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J5 |
| 1 | String6 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J6 |
| 1 | String7 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J7 |
| 1 | String8 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J8 |
| 1 | String9 | Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_Vertical | J9 |
| 1 | Universe5V | Scotts:Universal_5V_Horizontal | U2 |
| 1 | Up BTN | Scotts:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | VIN Select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J28 |
| 1 | VIN Voltage | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J23 |
| 1 | VIN1 LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | VIN2 LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | Zener 10V | Diode_SMD:D_SOD-123 | D1 |
The 114 most common of 116 parts.
More from computergeek1507/PB_16
12- 2 layers142.1 × 106 mm

- 2 layers142.1 × 99.9 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 93 mm

- 2 layers151.1 × 93.4 mm

- 2 layers148.1 × 102.6 mm

- 2 layers148.6 × 76.4 mm

- 2 layers83.2 × 71.4 mm

- 2 layers100 × 90.4 mm

- 2 layers148.6 × 75.5 mm

- 2 layers90.1 × 71.4 mm

- 2 layers93 × 87.7 mm

Similar boards
- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 90.8 mm

- 4 layers76 × 115 mm

- 4 layers142 × 119.7 mm

- 4 layers64 × 77 mm

OBSPro
FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA
131 parts3LGPL-2.1 - 4 layers100 × 54 mm

- 2 layers

- 2 layers100.4 × 56.8 mm

ALU
Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer
37 partsCERN-OHL-P-2.0
Questions
How big is the BBB 16 PCB?
It measures 148.8 × 116.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BBB 16 use?
116 parts, built around the SN74HCT245N, AM26C31MDREP, 24LC256T-I/MS and CN34J330CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BBB 16 KiCad files?
From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is BBB_16_SMD/BBB_16.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BBB 16 design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.