

ESP32 Controller
KiCad PCB Designs
- Size
- 85.1 × 89.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 63
- Pads
- 156
- Tracks, vias
- 174, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Mar 2020
- Updated
- 4 May 2026
Overview
ESP32 Controller is an open-source printed circuit board by computergeek1507, from the computergeek1507/KiCad_Designs repository on GitHub. It is a 2-layer board of 85.1 × 89.9 mm with 34 parts on 63 nets, routed with 174 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE and SN74HCT245N. Its parts include 10 connectors, 9 fuses, 3 capacitors, 3 ICs and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
2README
Power_Breakout_Fused2/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Fused Power Breakout
Power Fused Breakout Board for HP Power Supply

Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 3544-2 | Keystone_Fuse:FUSE_3544-2 | F1, F2, F3, F4, F5, F6, F7, F8, F9 |
| 8 | Conn_01x03 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 4 | MountingHole_3.5mm | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 2 | 100 | Resistor_THT:R_Array_SIP8 | RN1, RN2 |
| 1 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type701_RT11L02HGLU_1x02_P6.35mm_Horizontal | J9 |
| 1 | ESP32-DEVKITC | ESP32_DEVKITC:XCVR_ESP32-DEVKITC | U1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | Red | LED_THT:LED_D3.0mm | D1 |
| 1 | SN74HCT245N | SN74HCT245N:SN74HCT245N | U3 |
The 33 most common of 34 parts.
More from computergeek1507/KiCad_Designs
12- 2 layers142.1 × 90.8 mm

- 2 layers84.8 × 88.1 mm

- 2 layers67.8 × 64 mm

- 2 layers85.5 × 40.3 mm

- 2 layers85.1 × 91.6 mm

- 2 layers47.8 × 27.7 mm

- 2 layers34.1 × 42 mm

- 2 layers84.5 × 59 mm

- 2 layers62 × 85 mm

- 2 layers63.4 × 85 mm

- 2 layers65 × 56 mm

- 2 layers23 × 62 mm

Similar boards
- 4 layers100 × 54 mm

- 2 layers

- 2 layers148.8 × 116.9 mm

- 2 layers148.8 × 116.9 mm

- 2 layers100.4 × 56.8 mm

ALU
Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer
37 partsCERN-OHL-P-2.0 - 2 layers103.8 × 50 mm

Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers115 × 75 mm

SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm

ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42
Questions
How big is the ESP32 Controller PCB?
It measures 85.1 × 89.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 Controller use?
34 parts, built around the ESP32-DEVKITC-VE and SN74HCT245N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 Controller KiCad files?
From the computergeek1507/KiCad_Designs repository on GitHub, at the commit this page was made from: the board is ESP32_Controller_v2/ESP32_Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.