4 layers25 × 25 mm
Cameraadapt
compressedfish/SAFMC-2025-catE-dev
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
34 partsMIT
4 layers226.7 × 54 mm
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
- Size
- 226.7 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 69
- Pads
- 235
- Tracks, vias
- 287, 194
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Sep 2024
- Updated
- 20 Feb 2025
Overview
Thingy is an open-source printed circuit board by compressedfish, from the compressedfish/SAFMC-2025-catE-dev repository on GitHub, published under the MIT licence. It is a 4-layer board of 226.7 × 54 mm with 51 parts on 69 nets, routed with 287 tracks and 194 vias.
It is built around the IST8308, TPS565208DDC and WS2812B. Its parts include 18 connectors, 16 capacitors, 4 resistors, 3 ICs and 1 diode.
Main components
3
IST8308
LGA-16(3x3)-40℃~+125℃ 1.72V~3.6V 1.85mA 14bit I2C ±5Gs、±5Gs LGA-16(3x3) 3D Magnetic Sensors ROHSiSentek3D Magnetic Sensors
TPS565208DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 4.5V~17V 500kHz 5A 760mV~7V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdSAFMC-2025-HW-Dev
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
pcb/keyboard - general sensor and electronics assembly backplane thingy
pcb/cameraadapt - testing board for OV2312/OV9782 RGB-IR camera modules
todo:
- design clip on mounting plates for cameras
- design camera mount
- test ov2312 sensor
- break out rpi5 serial interfaces
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 6.8u | Capacitor_SMD:C_0805_2012Metric | C3, C6, C14, C15, C16 |
| 5 | Conn_01x06 | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J13, J15, J17, J18, J19 |
| 4 | Conn_01x02_Socket | RCconn:XT-60_male | J2, J3, J4, J8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H5, H6, H7, H8 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C4, C7 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4 |
| 2 | 220n | Resistor_SMD:R_0603_1608Metric | C8, C11 |
| 2 | 4.7u | Resistor_SMD:R_0603_1608Metric | C9, C12 |
| 1 | 10u | Capacitor_SMD:CP_Elec_5x5.4 | C2 |
| 1 | 1m | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C13 |
| 1 | 1u | Resistor_SMD:R_0603_1608Metric | C10 |
| 1 | 22u | Capacitor_SMD:CP_Elec_5x5.4 | C5 |
| 1 | 3.3u | Inductor_SMD:L_Sunlord_MWSA0603S | L1 |
| 1 | 54.9k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J16 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J10 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J14 |
| 1 | Conn_01x06_MountingPin | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J9 |
| 1 | Conn_01x06_Pin | Connector_TE-Connectivity:TE_Micro-MaTch_215079-6_2x03_P1.27mm_Vertical | J11 |
| 1 | Conn_01x06_Pin | Connector_FFC-FPC:TE_84952-6_1x06-1MP_P1.0mm_Horizontal | J12 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J7 |
| 1 | Conn_02x09_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J1 |
| 1 | IST8308 | Package_LGA:LGA-16_3x3mm_P0.5mm | U2 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Horizontal | J5 |
| 1 | TPS565208 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | VL53L1CXV0FY1 | Sensor_Distance:ST_VL53L1x | U3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |
More from compressedfish/SAFMC-2025-catE-dev
1Similar boards
- 4 layers93 × 93 mm
FCSat dual
SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster
Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.
215 parts3 - 4 layers108 × 69 mm
Fmc2sata
antmicro/fmc-sata-adapter
Adapter board exposing SATA M.2 SSD on FMC board-to-board connector
65 parts17Apache-2.0 - 2 layers100 × 84 mm
Cyclope
RICCIARDI-Adrien/Cyclope
Raspberry Pi powered robot with camera live stream and 360° lidar.
88 parts5MIT - 2 layers99 × 99 mm
2nd mainboard pcb
Fiberprinter/fiberprinter-electronics
Fiberelectronics Control every pulse, master every micron
132 parts4 - 2 layers48 × 78 mm
Sigma1
InSynchronous/mango
An ESP32-S3 based flight computer with an external flash, imu, barometer, magnetometer, 4 servo ports, and 4 pyrotechnic channels with MOSFETs. Designed for Aerospace applications.
62 parts2MIT - 2 layers50 × 87 mm
UltraHawk
InSynchronous/UltraHawk
A custom flight computer designed for drones and flight computers.
81 parts2MIT - 2 layers
Meshtastic node
ben-labs-ltd/BL-N305X
Meshtastic intended LoRa Node - Ben Labs Node 30.5dBm
115 parts1MIT - 4 layers110 × 75 mm
MainBoard nonRJ45
Gold-Rush-Robotics/pcb_2024
A repository to store work done on PCBs for the 2024 season
85 parts1MIT
Questions
How big is the Thingy PCB?
It measures 226.7 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Thingy use?
51 parts, built around the IST8308, TPS565208DDC and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thingy KiCad files?
From the compressedfish/SAFMC-2025-catE-dev repository on GitHub, at the commit this page was made from: the board is pcb/keyboard/thingy.kicad_pcb and its schematic pcb/cameraadapter/cameraadapt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thingy design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).