
Charge Seed Breakout
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
WS2811 is an open-source printed circuit board by clectric-diy, from the clectric-diy/Charge repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 22 × 12 mm with 7 parts on 8 nets, routed with 52 tracks and 0 vias.
It is built around the WS2811. Its parts include 3 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
KiCad source files for the 3.3V RGB LED breakout board.
LED_RGB-3.3V.kicad_sch: schematic (title block: "Charge 3.3V RGB LED").LED_RGB-3.3V.kicad_pcb: PCB layout.LED_RGB-3.3V.kicad_pro: project configuration.LED_RGB-3.3V.kicad_prl: local project state.| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 33R | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | WS2811 | clectric-diy:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


dmcke5/XWii-Controller
The Wii U gamepad layout is a fan-favourite for many gamers yet it is rarely used in the current generation of controllers.



carlos-paniagua/TapeTicsProject
This repository contains the hardware and software design files for TapeTics

JCohner/booth
Using 1000 NeoPixels with FastLED library we are controlling a custom built DJ booths lighting. The NeoPixels are organzied into rectangles on a DJ of which the light difuses around the rectnagle.

TheBlueManCoding/ModularControlPanel
Mechanics, PCB and Software for my modular control panel that is used with my cnc machine driven by LinuxCnc
It measures 22 × 12 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the WS2811. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clectric-diy/Charge repository on GitHub, at the commit this page was made from: the board is BreakoutBoards/WS2811/KiCad/WS2811.kicad_pcb and its schematic BreakoutBoards/ATMega4809/KiCad/ATMega4809.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).