2 layers
Encoder RGB
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
9 partsCERN-OHL-W-2.0
2 layers125 × 101 mm
Charge Seed Breakout
clectric-diy/ChargeA collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
- Size
- 125 × 101 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 39
- Pads
- 160
- Tracks, vias
- 143, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Feb 2026
- Updated
- 26 Apr 2026
Overview
Charge Seed Breakout is an open-source printed circuit board by clectric-diy, from the clectric-diy/Charge repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 125 × 101 mm with 10 parts on 39 nets, routed with 143 tracks and 0 vias.
It is built around the 2541FV-20P-B, JL308-25410G01 and P125-1120A0BS116A1. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
3README
BreakoutBoards/LED_RGB/KiCad/LED_RGB-3.3V/README.mdLED RGB 3.3V KiCad Files
KiCad source files for the 3.3V RGB LED breakout board.
Key Files
LED_RGB-3.3V.kicad_sch: schematic (title block: "Charge 3.3V RGB LED").LED_RGB-3.3V.kicad_pcb: PCB layout.LED_RGB-3.3V.kicad_pro: project configuration.LED_RGB-3.3V.kicad_prl: local project state.
Components
- RGB LED: TBD
- Current limiting resistors: TBD
- Connector / pin header: TBD
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2541FV-20P-B | easyeda2kicad:HDR-TH_20P-P2.54-V-F-2 | U4, U5, U7, U8 |
| 4 | JL308-25410G01 | easyeda2kicad:CONN-TH_10P-P2.54_JILN_JL308-25410G01 | U1, U2, U9, U10 |
| 2 | P125-1120A0BS116A1 | easyeda2kicad:HDR-TH_20P-P2.54-V-M-4 | U3, U6 |
More from clectric-diy/Charge
5- 2 layers17 × 22.5 mm
Potentiometer RGB
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
8 partsCERN-OHL-W-2.0 - 2 layers12 × 13 mm
LED RGB-3.3V
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
7 partsCERN-OHL-W-2.0 - 2 layers22 × 12 mm
WS2811
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
7 partsCERN-OHL-W-2.0 - 2 layers15 × 20 mm
Potentiometer
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
4 partsCERN-OHL-W-2.0
Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Charge Seed Breakout PCB?
It measures 125 × 101 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Charge Seed Breakout use?
10 parts, built around the 2541FV-20P-B, JL308-25410G01 and P125-1120A0BS116A1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Charge Seed Breakout KiCad files?
From the clectric-diy/Charge repository on GitHub, at the commit this page was made from: the board is BreakoutBoards/DaisySeed/Breakout/KiCad/Charge-Seed-Breakout.kicad_pcb and its schematic BreakoutBoards/ATMega4809/KiCad/ATMega4809.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Charge Seed Breakout design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).