
Charge Seed Breakout
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
Encoder RGB is an open-source printed circuit board by clectric-diy, from the clectric-diy/Charge repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board with 9 parts on 8 nets.
It is built around the PEL12T-4225S-S1024. Its parts include 5 resistors, 2 capacitors, 1 connector and 1 switch. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
KiCad source files for the 3.3V RGB LED breakout board.
LED_RGB-3.3V.kicad_sch: schematic (title block: "Charge 3.3V RGB LED").LED_RGB-3.3V.kicad_pcb: PCB layout.LED_RGB-3.3V.kicad_pro: project configuration.LED_RGB-3.3V.kicad_prl: local project state.| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | clectric-diy:R0603 | R1, R2 |
| 2 | 10nF | clectric-diy:C0603 | C1, C2 |
| 2 | 75R | clectric-diy:R0603 | R4, R5 |
| 1 | 150R | clectric-diy:R0603 | R3 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | PEL12T-4225S-S1024 | clectric-diy:PEL12T4225SS1024 | S1 |

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

Bemeier/bmcv
Macro CV controller for eurorack inspired by the Emblematic Systems Catalyst



FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


9 parts, built around the PEL12T-4225S-S1024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clectric-diy/Charge repository on GitHub, at the commit this page was made from: the board is BreakoutBoards/Encoder_RGB/KiCad/Encoder_RGB.kicad_pcb and its schematic BreakoutBoards/ATMega4809/KiCad/ATMega4809.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).