Skip to the content
2 layers17.8 × 30.5 mmProMicro QWIIC, the printed circuit board in 3D

ProMicro QWIIC

clayton13/ProMicro

collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

Size
17.8 × 30.5 mm
Copper layers
2
Thickness
0.8 mm
Parts
19
Nets
12
Pads
85
Tracks, vias
166, 27
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Dec 2020
Updated
5 Dec 2020

Overview

ProMicro QWIIC is an open-source printed circuit board by clayton13, from the clayton13/ProMicro repository on GitHub. It is a 2-layer board of 17.8 × 30.5 mm with 19 parts on 12 nets, routed with 166 tracks and 27 vias.

It is built around the ADS1015IDGS and BME280. Its parts include 6 connectors, 4 capacitors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

ESP12E/README.md

ProMicro_ESP12E

This module can be mounted to an Arduino Pro Mini, Arduino Nano, Sparkfun Pro Micro, or any other pincompatible MCU running with 3.3V.

Documentation

All files can be found on Github.

Schematic

ProMicro_ESP12E-Schematic

Layout

ProMicro_ESP12E-top ProMicro_ESP12E-bottom

BoM

Gerbers

can be found within the Github repository.

Links

License

Copyright Stefan Herold 2020

This documentation describes Open Hardware and is licensed under the CERN OHL v.1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

Parts

19
QtyValueFootprintReferences
3100nCapacitor_SMD:C_0603_1608MetricC2, C3, C4
3SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1, JP2, JP3
24k7Resistor_SMD:R_0603_1608MetricR3, R4
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J4
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5, J6
2QwiicConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ1, J2
110µCapacitor_SMD:C_0603_1608MetricC1
1ADS1015IDGSPackage_SO:TSSOP-10_3x3mm_P0.5mmU1
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU2
1Logo_Open_Hardware_SmallSymbol:OSHW-Symbol_6.7x6mm_SilkScreenLOGO1
1Sparkfun_Pro_Micro_3V3Module:Sparkfun_Pro_MicroA1

More from clayton13/ProMicro

12
  • 2 layers17.8 × 33 mmProMicro UART, the printed circuit board in 3D

    ProMicro UART

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    56 parts
  • 2 layers17.8 × 30.5 mmProMicro LORA, the printed circuit board in 3D

    ProMicro LORA

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    44 parts
  • 4 layers17.8 × 30.5 mmProMicro POS, the printed circuit board in 3D

    ProMicro POS

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    36 parts
  • 2 layers17.8 × 30.5 mmProMicro ANA, the printed circuit board in 3D

    ProMicro ANA

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    34 parts
  • 4 layers17.8 × 27.9 mmProMicro BOOST, the printed circuit board in 3D

    ProMicro BOOST

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    25 parts
  • 2 layers17.8 × 33 mmProMicro ESP32, the printed circuit board in 3D

    ProMicro ESP32

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    20 parts
  • 4 layers17.8 × 30.5 mmProMicro CONN, the printed circuit board in 3D

    ProMicro CONN

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    19 parts
  • 2 layers17.8 × 30.5 mmProMicro ZPM, the printed circuit board in 3D

    ProMicro ZPM

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    17 parts
  • 2 layers17.8 × 30.5 mmProMicro LOG, the printed circuit board in 3D

    ProMicro LOG

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    16 parts
  • 2 layers17.8 × 30.5 mmProMicro BUS, the printed circuit board in 3D

    ProMicro BUS

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    15 parts
  • 2 layers17.8 × 33 mmProMicro ESP12E, the printed circuit board in 3D

    ProMicro ESP12E

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    15 parts
  • 2 layers23.4 × 51.4 mmProMicro WING, the printed circuit board in 3D

    ProMicro WING

    clayton13/ProMicro

    collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

    8 parts

Similar boards

  • 4 layers145.5 × 64 mmMuffin, the printed circuit board in 3D

    Muffin

    JunOllyLi/TX_PCB

    NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.

    138 parts17
  • 2 layers64.8 × 62 mmSensor, the printed circuit board in 3D

    Sensor

    chukhanhhoang/SoftRoboticSetupFesto

    Code for Raspberry Pi and Matlab/Simulink

    89 parts14
  • 4 layers70.8 × 110 mmBonkulator, the printed circuit board in 3D

    Bonkulator

    shannon-greenlight/bonkulator

    Multifunction Eurorack Module

    261 parts11GPL-3.0
  • 4 layers100 × 100 mmSolar panel side Z, the printed circuit board in 3D

    Solar panel side Z

    proveskit/solar_boards

    The solar panel boards for the PROVES Kit

    45 parts4CERN-OHL-W-2.0
  • 4 layers65 × 30 mmGripper hat, the printed circuit board in 3D

    Gripper hat

    nhnifong/stringman-pcbs

    PCBs used in the Stringman robot

    56 parts3
  • 4 layers88 × 94.5 mmBattery Board V3a, the printed circuit board in 3D

    Battery Board V3a

    proveskit/battery_board

    The battery and power management board for the PROVES Kit.

    204 parts2CERN-OHL-W-2.0
  • 4 layers66.9 × 66.9 mmTemp Monitor, the printed circuit board in 3D

    Temp Monitor

    Alex-C-EE/Reliable-Temp-Monitor

    A CAN Node designed to take temperature measurement from 3 analog-output sensors and control 2x 24V fans

    127 parts1
  • 4 layers110 × 120 mmDUT Interface board v0.2, the printed circuit board in 3D

    DUT Interface board v0.2

    krishchan007/DUT_Interface_board_v0.2

    v0.2 of DUT interface board with significant changes in layout, architecture etc.

    271 parts1

Questions

How big is the ProMicro QWIIC PCB?

It measures 17.8 × 30.5 mm and has 2 copper layers, 0.8 mm thick.

What parts does the ProMicro QWIIC use?

19 parts, built around the ADS1015IDGS and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ProMicro QWIIC KiCad files?

From the clayton13/ProMicro repository on GitHub, at the commit this page was made from: the board is QWIIC/ProMicro_QWIIC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ProMicro QWIIC design in my own project?

Its repository states no licence, so its author keeps all rights: ask clayton13 before reusing the design.