2 layers17.8 × 33 mm
ProMicro UART
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
56 parts
2 layers23.4 × 51.4 mm
ProMicro WING
clayton13/ProMicrocollection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
- Size
- 23.4 × 51.4 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 8
- Nets
- 26
- Pads
- 103
- Tracks, vias
- 117, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Dec 2020
- Updated
- 5 Dec 2020
Overview
ProMicro WING is an open-source printed circuit board by clayton13, from the clayton13/ProMicro repository on GitHub. It is a 2-layer board of 23.4 × 51.4 mm with 8 parts on 26 nets, routed with 117 tracks and 30 vias.
It belongs with the ESP32, ESP8266 and AVR (ATmega, ATtiny) boards of this library.
README
ESP12E/README.mdProMicro_ESP12E
This module can be mounted to an Arduino Pro Mini, Arduino Nano, Sparkfun Pro Micro, or any other pincompatible MCU running with 3.3V.
Documentation
All files can be found on Github.
Schematic
Layout
BoM
Gerbers
can be found within the Github repository.
Links
License
Copyright Stefan Herold 2020
This documentation describes Open Hardware and is licensed under the CERN OHL v.1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | TestPoint | MountingHole:MountingHole_2.7mm | TP1, TP2 |
| 1 | Adafruit_Feather_HUZZAH_ESP8266 | WING:Adafruit_Feather | U2 |
| 1 | Adafruit_HUZZAH32_ESP32_Feather | WING:Adafruit_Feather_mod2 | U1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano_mod | A2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | LOGO1 |
| 1 | Sparkfun_Pro_Micro_3V3 | Module:Sparkfun_Pro_Micro | A1 |
| 1 | initials | Symbol:initials | TP3 |
More from clayton13/ProMicro
12- 2 layers17.8 × 30.5 mm
ProMicro LORA
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
44 parts - 4 layers17.8 × 30.5 mm
ProMicro POS
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
36 parts - 2 layers17.8 × 30.5 mm
ProMicro ANA
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
34 parts - 4 layers17.8 × 27.9 mm
ProMicro BOOST
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
25 parts - 2 layers17.8 × 33 mm
ProMicro ESP32
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
20 parts - 4 layers17.8 × 30.5 mm
ProMicro CONN
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
19 parts - 2 layers17.8 × 30.5 mm
ProMicro QWIIC
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
19 parts - 2 layers17.8 × 30.5 mm
ProMicro ZPM
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
17 parts - 2 layers17.8 × 30.5 mm
ProMicro LOG
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
16 parts - 2 layers17.8 × 30.5 mm
ProMicro BUS
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
15 parts - 2 layers17.8 × 33 mm
ProMicro ESP12E
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
15 parts
Similar boards
- 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the ProMicro WING PCB?
It measures 23.4 × 51.4 mm and has 2 copper layers, 0.8 mm thick.
What parts does the ProMicro WING use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProMicro WING KiCad files?
From the clayton13/ProMicro repository on GitHub, at the commit this page was made from: the board is WING/ProMicro_WING.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProMicro WING design in my own project?
Its repository states no licence, so its author keeps all rights: ask clayton13 before reusing the design.