
ProMicro UART
clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini
ProMicro ESP12E is an open-source printed circuit board by clayton13, from the clayton13/ProMicro repository on GitHub. It is a 2-layer board of 17.8 × 33 mm with 15 parts on 20 nets, routed with 304 tracks and 46 vias.
It is built around the ESP-12E and MMBT2222. Its parts include 5 resistors, 4 connectors, 2 transistors, 1 capacitor and 1 IC. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
This module can be mounted to an Arduino Pro Mini, Arduino Nano, Sparkfun Pro Micro, or any other pincompatible MCU running with 3.3V.
All files can be found on Github.
can be found within the Github repository.
Copyright Stefan Herold 2020
This documentation describes Open Hardware and is licensed under the CERN OHL v.1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 12k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7, R8 |
| 2 | mmbt2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1µF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ESP-12E | RF_Module:ESP-12E | U2 |
| 1 | ESP01(Prog) | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | LCD | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | Sparkfun_Pro_Micro_3V3 | Module:Sparkfun_Pro_Micro | A1 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

clayton13/ProMicro
collection of various PCBs fitting the Sparkfun ProMicro and Arduino ProMini

PacktPublishing/Hands-On-Embedded-Programming-with-CPP-17
Hands-On Embedded Programming with CPP 17, published by Packt

RichardRozehnal/Gotek-Floppy-Disk-Emulator-V2
Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc.



alexthomazo/remora
Contrôleur fil pilote permettant de contrôler 7 zones et un relai.

bklemencz/Shutter_RF
STM8 Shutter Controller with RS485 and EV1527 433Mhz interface

thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules

It measures 17.8 × 33 mm and has 2 copper layers, 0.8 mm thick.
15 parts, built around the ESP-12E and MMBT2222. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clayton13/ProMicro repository on GitHub, at the commit this page was made from: the board is ESP12E/ProMicro_ESP12E.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask clayton13 before reusing the design.