
Theseus
christopolise/Project_Theseus_API
Contains base hardware schematics and submodule for non-game-logic related code to jtylers/Project_Theseus

Contains base hardware schematics and submodule for non-game-logic related code to jtylers/Project_Theseus
TheseusI2CUniversal is an open-source printed circuit board by christopolise, from the christopolise/Project_Theseus_API repository on GitHub. It is a 2-layer board of 30.5 × 40 mm with 19 parts on 17 nets, routed with 367 tracks and 46 vias.
It is built around the RJ45. Its parts include 8 resistors, 5 connectors, 2 ICs and 1 capacitor.
A BYU Linux Club Project in Conjunction with UTOS
To install necessary Pip Packages:
pip install -r requirements.txtFor more information and hints regarding Project Theseus, feel free to contact one of us via email:
Helpful links to get you started on contributing to the Project Theseus API
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 |
| 3 | Conn_01x11 | Socket_Strips:Socket_Strip_Straight_1x11_Pitch2.54mm | J3, J4, J5 |
| 3 | GS3 | Connectors:GS3 | A0, A1, A2 |
| 1 | AD7997 | adafruit:TSSOP20 | U2 |
| 1 | Barrel_Jack | SparkFun-Connectors:POWER_JACK_PTH | J2 |
| 1 | C | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | PCF8574-TSSOP20 | adafruit:TSSOP20 | U1 |
| 1 | RJ45 | SparkFun-Connectors:RJ45-8 | J1 |

christopolise/Project_Theseus_API
Contains base hardware schematics and submodule for non-game-logic related code to jtylers/Project_Theseus

christopolise/Project_Theseus_API
Contains base hardware schematics and submodule for non-game-logic related code to jtylers/Project_Theseus

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 30.5 × 40 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the christopolise/Project_Theseus_API repository on GitHub, at the commit this page was made from: the board is schematics/kicad/TheseusI2CUniversal/TheseusI2CUniversal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask christopolise before reusing the design.