2 layers183.5 × 133 mm
2 layers100 × 100 mm
GateDriver
christopherwj/SDG31A place for all of our files related to our project
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 143
- Pads
- 319
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Oct 2021
- Updated
- 29 Apr 2022
Overview
GateDriver is an open-source printed circuit board by christopherwj, from the christopherwj/SDG3 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 73 parts on 143 nets.
It is built around the IR2113S, LM386 and 74AHC04D, with the LM393 and IRF540N among its other parts. Its parts include 20 resistors, 14 connectors, 11 capacitors, 8 ICs and 6 diodes.
Main components
5
IR2113S
SOIC16WHigh And Low Side DriverInfineon TechnologiesUncategorised
LM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmps
74AHC04D
SOIC-14-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、4.4V 2V~5.5V 2uA 500mV~1.65V 6 7.5ns@5V,50pF 74AHC 8mA 8mA SOIC-14 Inverters ROHSNexperiaInvertersLM393
SOP-8-16V~16V 0℃~+70℃ 2 2.5mA 250nA 2V~36V 36V 5mV 5nA Fail-safe function Open-drain SOP-8 Comparators ROHSMSKSEMIComparators
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
README
README.mdSDG3 - Powered Speaker System - Happy Tunes
What should I expect to find in this repo?
Here you can find all of the files related to Team 3's Senior Design Project
This includes: components, datasheets, simulations, source code and more!
Who is on the team?
| Team Member | Field |
|---|---|
| Brian Ahlers | Electrical Engineer |
| Abraham Carranza | Computer Engineer |
| Kaitlyn Hamiter | Electrical Engineer |
| Christopher Johnson | Computer Engineer |
| Christopher Kihano | Computer Engineer |
Shortcuts
From here on you will find sections detailing different points of Team 3's progress, links to documents and Google Drive directories.
Senior Design B
Draw.io Diagrams
System Integration Testing
Hardware Readiness
Firmware Readiness
Team Labor Hours
Senior Design A
Draw.io Diagrams
System Description, Requirements, Validation
Risk Analysis
Prototype Activity
Critical Design Review
Final Report
Team Labor Hours
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R8, R10, R11, R12, R17, R18, R19, R20 |
| 6 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R13, R14, R15, R16 |
| 5 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D3, D4, D5, D6 |
| 2 | 10k_POT_TRIM_US | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Horizontal | RV1, RV2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R9 |
| 2 | 220u | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C5, C6 |
| 2 | 22u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C7, C8 |
| 2 | 45 uH | Inductor_THT:L_CommonMode_Toroid_Vertical_L24.0mm_W16.3mm_Px10.16mm_Py20.32mm_muRATA_5200 | L1, L2 |
| 2 | 5.6uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C9, C10 |
| 2 | IR2113 | Package_DIP:DIP-14_W7.62mm | U7, U8 |
| 2 | SW_SPDT_MSM | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1, SW2 |
| 2 | TEST_HIGH | Connector_Pin:Pin_D1.3mm_L11.0mm | J6, J8 |
| 2 | TEST_LOW | Connector_Pin:Pin_D1.3mm_L11.0mm | J7, J9 |
| 2 | TEST_OUTPUT | Connector_Pin:Pin_D1.3mm_L11.0mm | J12, J13 |
| 2 | TEST_Return | Connector_Pin:Pin_D1.3mm_L11.0mm | J10, J11 |
| 1 | 0.05 uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 1nF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 220n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 22uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C11 |
| 1 | 250 uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 1 | 74AHC04 | Package_DIP:DIP-14_W7.62mm | U6 |
| 1 | Arduino_Due_Shield | Arduino:Arduino_Due_Shield | XA1 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J1 |
| 1 | BT Module | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | J2 |
| 1 | LM386 | Package_DIP:PowerIntegrations_PDIP-8B | U3 |
| 1 | LM393 | Package_DIP:PowerIntegrations_PDIP-8B | U4 |
| 1 | LM555xN | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM7810_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | SW_Push_DPDT | Button_Switch_THT:SW_CuK_JS202011AQN_DPDT_Angled | SW3 |
| 1 | Speaker | CustomFootprints:ScrewTerm | J14 |
| 1 | input | CustomFootprints:ScrewTerm | J3 |
| 1 | output_5V | CustomFootprints:ScrewTerm | J5 |
| 1 | output_VCC | CustomFootprints:ScrewTerm | J4 |
More from christopherwj/SDG3
1Similar boards
- 4 layers190 × 91 mm
Inv v1
reljamar/singlePhaseInverter
A precursor project to a future three-phase inverter for driving synchronous motors
160 parts1MIT - 2 layers107.2 × 60.3 mm
Class D Audio Amplifier
fredie1811/Class-D-Amplifier
The KiCad Schematic and PCB Layout for a Half Bridge Class-D Audio Amplifier using an MH-M28 for inputting the audio via an audio jack or via bluetooth.
35 parts - 2 layers98.2 × 47.9 mm
OscBoardV12
shreya2717/Solar-Rooftop-Financing-Market-Risk-Analysis
Solar energy is the cleanest and most available renewable energy source. The Modern technology can harness this energy for a variety of uses, including producing electricity, providing light and heating water for…
114 parts - 2 layers177 × 91.6 mm
Power Charg AUTO 12V C
Aleksei327/STM32G474-Power-Charger
Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.
160 parts3 - 4 layers44 × 22 mm
Doublebridgeright v8
supernova-10/Kubits-programmable-magnets
Kubit is my Final Year Project (FYP) — a modular reconfigurable robot that uses programmable magnets, gears, and custom PCB-based control to achieve untethered actuation and reconfiguration.
32 parts1 - 2 layers73.2 × 67.1 mm
- 2 layers145.9 × 153.4 mm
- 2 layers82.8 × 160 mm
Questions
How big is the GateDriver PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GateDriver use?
73 parts, built around the IR2113S, LM386, 74AHC04D and LM393. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GateDriver KiCad files?
From the christopherwj/SDG3 repository on GitHub, at the commit this page was made from: the board is Hardware/PCB & Schematic/Full_Bridge_Comp_Due/GateDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GateDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask christopherwj before reusing the design.