Skip to the content
4 layers44 × 22 mmDoublebridgeright v8, the printed circuit board in 3D

Kubit is my Final Year Project (FYP) — a modular reconfigurable robot that uses programmable magnets, gears, and custom PCB-based control to achieve untethered actuation and reconfiguration.

Size
44 × 22 mm
Copper layers
4
Thickness
1.6 mm
Parts
32
Nets
52
Pads
132
Tracks, vias
316, 25
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
4 Sep 2025
Updated
4 Sep 2025

Overview

Doublebridgeright v8 is an open-source printed circuit board by supernova-10, from the supernova-10/Kubits-programmable-magnets repository on GitHub. It is a 4-layer board of 44 × 22 mm with 32 parts on 52 nets, routed with 316 tracks and 25 vias.

It is built around the IR2113S, IRFP4668PBF and ES1J. Its parts include 8 resistors, 8 transistors, 4 capacitors, 4 ICs and 4 diodes.

Main components

3

Parts

32
QtyValueFootprintReferences
810Resistor_SMD:R_0805_2012MetricR2, R3, R4, R5, R6, R7, R8, R9
8IRFP4668PbFPackage_TO_SOT_SMD:SC-59_HandsolderingQ2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
410uCapacitor_SMD:C_1210_3225MetricC1, C2, C3, C4
4ES1Jfootprints:DIOM5227X250ND1, D2, D4, D6
4IR2113SPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU1, U2, U3, U4
2282834-2TE_282834-2:TE_282834-2J1, J3
2Conn_01x04_PinConnector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_HorizontalJ5, J6

More from supernova-10/Kubits-programmable-magnets

3
  • 2 layers48.5 × 28.5 mmPower module v9, the printed circuit board in 3D

    Power module v9

    supernova-10/Kubits-programmable-magnets

    Kubit is my Final Year Project (FYP) — a modular reconfigurable robot that uses programmable magnets, gears, and custom PCB-based control to achieve untethered actuation and reconfiguration.

    31 parts1
  • 2 layers33 × 33 mmMcu v6, the printed circuit board in 3D

    Mcu v6

    supernova-10/Kubits-programmable-magnets

    Kubit is my Final Year Project (FYP) — a modular reconfigurable robot that uses programmable magnets, gears, and custom PCB-based control to achieve untethered actuation and reconfiguration.

    8 parts1
  • 2 layers9.9 × 23.5 mmCapextended v2, the printed circuit board in 3D

    Capextended v2

    supernova-10/Kubits-programmable-magnets

    Kubit is my Final Year Project (FYP) — a modular reconfigurable robot that uses programmable magnets, gears, and custom PCB-based control to achieve untethered actuation and reconfiguration.

    2 parts1

Similar boards

  • 2 layers126 × 78 mmPsu2psu02, the printed circuit board in 3D

    Psu2psu02

    minamonra/MKiCadPro

    MKiCadPro

    53 parts
  • 2 layers273.1 × 186.1 mmIon pump controller, the printed circuit board in 3D

    Ion pump controller

    AlexW-proj/ion-pump-controller

    open source controller that takes 24V in and spits out 0 - 7000V, set by a knob with an adjustable ramp time

    63 parts2
  • 2 layers189 × 114.5 mmInduction Heater PCB, the printed circuit board in 3D

    Induction Heater PCB

    FarhanKashif/ZVS-Induction-Heater

    400W DIY Inductor Heater

    34 parts1
  • 2 layers53 × 47.1 mmHot Swap, the printed circuit board in 3D

    Hot Swap

    ivanhorombe/Voltage-Regulator-FSAE

    Designed a voltage regulation PCB for racecar.

    22 parts
  • 2 layers177 × 91.6 mmPower Charg AUTO 12V C, the printed circuit board in 3D

    Power Charg AUTO 12V C

    Aleksei327/STM32G474-Power-Charger

    Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.

    160 parts3
  • 2 layers183.5 × 133 mmGateDriver, the printed circuit board in 3D

    GateDriver

    christopherwj/SDG3

    A place for all of our files related to our project

    77 parts1
  • 4 layers190 × 91 mmInv v1, the printed circuit board in 3D

    Inv v1

    reljamar/singlePhaseInverter

    A precursor project to a future three-phase inverter for driving synchronous motors

    160 parts1MIT
  • 2 layers107.2 × 60.3 mmClass D Audio Amplifier, the printed circuit board in 3D

    Class D Audio Amplifier

    fredie1811/Class-D-Amplifier

    The KiCad Schematic and PCB Layout for a Half Bridge Class-D Audio Amplifier using an MH-M28 for inputting the audio via an audio jack or via bluetooth.

    35 parts

Questions

How big is the Doublebridgeright v8 PCB?

It measures 44 × 22 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Doublebridgeright v8 use?

32 parts, built around the IR2113S, IRFP4668PBF and ES1J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Doublebridgeright v8 KiCad files?

From the supernova-10/Kubits-programmable-magnets repository on GitHub, at the commit this page was made from: the board is doublebridgeright/doublebridgeright v8.kicad_pcb and its schematic capextended/capextended v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Doublebridgeright v8 design in my own project?

Its repository states no licence, so its author keeps all rights: ask supernova-10 before reusing the design.