2 layers100 × 99.8 mm
2 layers50.3 × 50.3 mm
SAM breakout board
christopherwj/little_devilSAMC21 breakout development board
- Size
- 50.3 × 50.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 75
- Pads
- 272
- Tracks, vias
- 476, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Oct 2019
- Updated
- 27 Oct 2019
Overview
SAM breakout board is an open-source printed circuit board by christopherwj, from the christopherwj/little_devil repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50.3 × 50.3 mm with 56 parts on 75 nets, routed with 476 tracks and 26 vias.
It is built around the TPS62163DSG, TPS63060DSC and B160-13-F(MS). Its parts include 18 capacitors, 11 connectors, 10 resistors, 7 diodes and 3 ICs. It belongs with the interfaces and adapters and microcontroller boards boards and the SAM D and SAM boards of this library.
Main components
3Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C4, C5, C10, C11 |
| 4 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C16, C17, C18 |
| 4 | B160-13-F | Diode_SMD:D_SMA | D1, D2, D3, D4 |
| 4 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J6, J7 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C6, C7, C9 |
| 3 | 240 | Resistor_SMD:R_1206_3216Metric | R5, R6, R7 |
| 3 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Horizontal | J9, J10, J11 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D5, D6, D7 |
| 2 | 15pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C13, C14 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric | R8, R10 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C12 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 100pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 10pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C15 |
| 1 | 111k | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8 |
| 1 | 1uH | Inductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L2 |
| 1 | 2.2k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 2.2uH | Inductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | ATSAMD21G18A-AUT | Package_QFP:TQFP-48_7x7mm_P0.5mm | U3 |
| 1 | BATT_PWR | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Omron_A6S-110x_W8.9mm_P2.54mm | SW1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J8 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | Crystal_ABS | footprints:SOJ-4 | Y1 |
| 1 | Ferrite_Bead_Small | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | MAIN_PWR | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Omron_A6S-110x_W8.9mm_P2.54mm | SW3 |
| 1 | RST_SW | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW2 |
| 1 | TPS62163DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U1 |
| 1 | TPS63060 | Package_SON:Texas_S-PWSON-N10_ThermalVias | U2 |
| 1 | USB_B_Micro | digikey-footprints:USB_Micro_B_Female_10118194-0001LF | J4 |
Questions
How big is the SAM breakout board PCB?
It measures 50.3 × 50.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SAM breakout board use?
56 parts, built around the TPS62163DSG, TPS63060DSC and B160-13-F(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SAM breakout board KiCad files?
From the christopherwj/little_devil repository on GitHub, at the commit this page was made from: the board is SAM_breakout_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SAM breakout board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers202 × 125 mm
- 4 layers103.5 × 90.6 mm
- 2 layers80 × 55 mm
- 2 layers49 × 35 mm
Boost sequencer
danupp/boost_sequencer
Universal sequencer for radio applications with 12 to 28V boost regulator for coaxial relays
56 parts1 - 2 layers98 × 79.5 mm
Flex over can
twisted-builds-llc/sloppy_holley_flex-over-can
CAN bus input/output module for Holley Terminator X (also HP/Dominator class ECUs).
86 parts1 - 2 layers40 × 30 mm
Led pwm-4bit
hyiger/led-pwm-4bit
4-bit LED PWM controller for a 24 V strip, driven by a Prusa GPIO Hackerboard (KiCad 10)
39 parts - 6 layers66 × 54 mm
JC8012P4A1C I W Y CAN
Meisterschulen-am-Ostbahnhof-Munchen/JC8012P4A1C_I_W_Y_CAN
JC8012P4A1C_I_W_Y addon PCB for CAN-Bus
45 partsGPL-3.0