Skip to the content
2 layers23.6 × 37.2 mmLed status bar, the printed circuit board in 3D

Mini breakout board with 5 rgb leds in series

Size
23.6 × 37.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
11
Pads
54
Tracks, vias
134, 12
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Apr 2023
Updated
6 May 2024

Overview

Led status bar is an open-source printed circuit board by chof747, from the chof747/led-status-bar repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 23.6 × 37.2 mm with 21 parts on 11 nets, routed with 134 tracks and 12 vias.

It is built around the WS2812B. Its parts include 5 capacitors, 5 diodes, 4 resistors, 2 transistors and 2 connectors. It belongs with the lEDs and displays and interfaces and adapters boards of this library.

Main components

1

README

README.md

Status bar with RGB Leds

This is a breakout board containing 5 WS2812B compatible RGB Leds that can be used to display some kind of status information or for other presentation stuff

It contains the following elements:

  • 5 WS2812B compatible surface mount RGB leds
  • MOSFETs acting as signal level shifters so it can be triggered by a 3V3 signal while the LEDs are powered by a higher voltage
  • By-pass capacitors for each LED according to the data sheets
  • A 4-pin header so that it can be connected to VDD (e.g. 5V) and VREF (e.g. 3v3), GND and a data line (1 - VDD, 2- Data, 3 - VREF, 4 - GND)
  • It contains an outbound connector to daisy chain boards

Revision History:

  • v1.0: Initial version (filed for fabrication: 19.04.2023, assembled 14.5.2023)
  • v1.1: Corrected revision including fixed version for level shifting and an outbound connector

Parts

21
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5
5WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D2, D3, D4, D5
410kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4
22N7002Package_TO_SOT_SMD:SOT-23Q1, Q2
2MountingHoleChof747 Footprints:MountingHole_3.2mm_M3-smallBorderH1, H2
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ1
1Conn_01x04Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_HorizontalJ2
1LOGOChof747 Logos:LOGO smallG***

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the Led status bar PCB?

It measures 23.6 × 37.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led status bar use?

21 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led status bar KiCad files?

From the chof747/led-status-bar repository on GitHub, at the commit this page was made from: the board is led-status-bar.kicad_pcb and its schematic led-status-bar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led status bar design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).