
Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

Little PCB with a simple charger for Li-Ion devices
Battery holder is an open-source printed circuit board by chof747, from the chof747/battery-holder-hardware repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 30 × 20 mm with 15 parts on 17 nets, routed with 48 tracks and 2 vias.
It is built around the TP4056. Its parts include 6 connectors, 3 resistors, 2 diodes and 1 capacitor. It belongs with the power boards of this library.
Little PCB with a simple charger for Li-Ion devices
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 1 | |||
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Bat+ | Connector_Wire:SolderWirePad_1x01_SMD_2x3mm | J5 |
| 1 | Bat- | Connector_Wire:SolderWirePad_1x01_SMD_2x3mm | J6 |
| 1 | CHRG | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MountingHole_3mm | MountingHole:MountingHole_3mm | |
| 1 | STBY | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | TP4056 | footprints:SOP-8-Tiny Package | J3 |
| 1 | aux bat | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | aux pwr | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | usb | Chof747 Footprints:101181920002LF | J2 |

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…


hhuysqt/esp32s3-keyboard
USB/BLE keyboard driver based on ESP32S3-WROOM-1


jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1


It measures 30 × 20 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the chof747/battery-holder-hardware repository on GitHub, at the commit this page was made from: the board is battery_holder.kicad_pcb and its schematic battery_holder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).