Skip to the content
2 layers41.7 × 52.3 mmTablet psu, the printed circuit board in 3D

Varios PCB design for 3D printers and drones

Size
41.7 × 52.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
6
Pads
35
Tracks, vias
40, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Aug 2021
Updated
28 Oct 2026

Overview

Tablet psu is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 41.7 × 52.3 mm with 18 parts on 6 nets, routed with 40 tracks and 0 vias.

Its parts include 5 capacitors, 4 connectors, 2 resistors, 2 diodes and 1 IC. It belongs with the robots and motor control and power boards of this library.

README

README.md

juice-plus-pcb

Varios PCB design for 3D printers and drones

Parts

18
QtyValueFootprintReferences
31000ucustom-footprints:capacitor-12p5-20mmC1, C3, C4
2100nCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2, C7
2LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2
12k2Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2
14k7Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1
1BATTConnector_JST:JST_XH_S02B-XH-A_1x02_P2.50mm_HorizontalJ4
1FAN1Connector_JST:JST_XH_S02B-XH-A_1x02_P2.50mm_HorizontalJ2
1FAN2Connector_JST:JST_XH_S02B-XH-A_1x02_P2.50mm_HorizontalJ3
1FuseFuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolderF1
1PWR_INConnector_JST:JST_XH_S02B-XH-A_1x02_P2.50mm_HorizontalJ1
1buck-converter-3Acustom-footprints:Buck-converter-3AU1

The 15 most common of 18 parts.

More from ChipCE/juice-plus-pcb

12
  • 2 layers83 × 76 mmJST mounter panelized, the printed circuit board in 3D

    JST mounter panelized

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    180 parts2GPL-3.0
  • 4 layersPico extender, the printed circuit board in 3D

    Pico extender

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    94 parts2GPL-3.0
  • 2 layers99.8 × 48.3 mmCar bluetooth, the printed circuit board in 3D

    Car bluetooth

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    60 parts2GPL-3.0
  • 2 layers75.4 × 80.6 mmPwm esc panelized, the printed circuit board in 3D

    Pwm esc panelized

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    58 parts2GPL-3.0
  • 2 layers80 × 100 mmTiming light, the printed circuit board in 3D

    Timing light

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    54 parts2GPL-3.0
  • 2 layers83.3 × 73.4 mmDuplicate, the printed circuit board in 3D

    Duplicate

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    36 parts2GPL-3.0
  • 4 layers80.3 × 25.7 mmAdapter board, the printed circuit board in 3D

    Adapter board

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    35 parts2GPL-3.0
  • 2 layers60.5 × 42.5 mmCar psu generic, the printed circuit board in 3D

    Car psu generic

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    34 parts2GPL-3.0
  • 2 layers44.5 × 43.2 mmBluetooth JDY-67 dev board, the printed circuit board in 3D

    Bluetooth JDY-67 dev board

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    30 parts2GPL-3.0
  • 4 layersPico motion, the printed circuit board in 3D

    Pico motion

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    29 parts2GPL-3.0
  • 2 layers75.2 × 40.1 mmPwm esc, the printed circuit board in 3D

    Pwm esc

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    29 parts2GPL-3.0
  • 2 layers99.8 × 25.4 mmCar bluetooth lite, the printed circuit board in 3D

    Car bluetooth lite

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    27 parts2GPL-3.0

Similar boards

  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993
  • 2 layers44 × 51.3 mm4272MAVcoder R4, the printed circuit board in 3D

    4272MAVcoder R4

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    18 parts915
  • 2 layers28.3 × 14.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    18 parts716GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 stepper driver, the printed circuit board in 3D

    L0 stepper driver

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    18 parts546MIT
  • 2 layersMooltipass, the printed circuit board in 3D

    Mooltipass

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    18 parts531
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0

Questions

How big is the Tablet psu PCB?

It measures 41.7 × 52.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tablet psu use?

18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tablet psu KiCad files?

From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is tablet-psu/tablet-psu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tablet psu design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).