4 layers
2 layers83 × 76 mm
JST mounter panelized
ChipCE/juice-plus-pcb2Varios PCB design for 3D printers and drones
- Size
- 83 × 76 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 180
- Nets
- 4
- Pads
- 216
- Tracks, vias
- 216, 216
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Aug 2021
- Updated
- 28 Oct 2026
Overview
JST mounter panelized is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83 × 76 mm with 180 parts on 4 nets, routed with 216 tracks and 216 vias.
It belongs with the robots and motor control boards of this library.
README
README.mdjuice-plus-pcb
Varios PCB design for 3D printers and drones
Parts
180| Qty | Value | Footprint | References |
|---|---|---|---|
| 72 | Conn_01x01_Female | custom-footprints:solder-pad | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +56 |
| 36 | Conn_01x02_Female | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +20 |
The 108 most common of 180 parts.
More from ChipCE/juice-plus-pcb
12- 2 layers99.8 × 48.3 mm
- 2 layers75.4 × 80.6 mm
- 2 layers80 × 100 mm
- 2 layers83.3 × 73.4 mm
- 4 layers80.3 × 25.7 mm
- 2 layers60.5 × 42.5 mm
- 2 layers44.5 × 43.2 mm
Bluetooth JDY-67 dev board
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones
30 parts2GPL-3.0 - 4 layers
- 2 layers75.2 × 40.1 mm
- 2 layers99.8 × 25.4 mm
- 2 layers96 × 38 mm
Similar boards
- 2 layers277.2 × 107.5 mm
- 2 layers180 × 110 mm
ISD1700 sampler main board
hiro-akihabara/OpnBeat
OpnBeat is open source Lo-fi sampler project
180 parts67GPL-3.0 - 2 layers100 × 100 mm
- 2 layers272 × 86 mm
- 2 layers123 × 87.5 mm
FastLOGIC
Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.
180 parts23MIT - 2 layers100 × 100 mm
Zxuno1010
UzixLS/zxuno1010-board
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
180 parts23MIT - 2 layers207.3 × 150.9 mm
40pin PICMCU append
ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit
Pic16f877a Design files and sample code for Ultra Development Kit
180 parts17 - 2 layers60 × 110 mm
Questions
How big is the JST mounter panelized PCB?
It measures 83 × 76 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JST mounter panelized use?
180 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JST mounter panelized KiCad files?
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is JST-mounter/JST-mounter_panelized.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the JST mounter panelized design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).