2 layers82 × 100 mm
Robo car
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
36 parts
2 layers48.3 × 68.6 mm
Powered multisensor
ChefsSlaad/PCBs_and_Micropythonstoring custom pcbs and micropython code for home projects
- Size
- 48.3 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 22
- Pads
- 78
- Tracks, vias
- 108, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Oct 2024
- Updated
- 21 Dec 2024
Overview
Powered multisensor is an open-source printed circuit board by ChefsSlaad, from the ChefsSlaad/PCBs_and_Micropython repository on GitHub. It is a 2-layer board of 48.3 × 68.6 mm with 21 parts on 22 nets, routed with 108 tracks and 1 via.
It is built around the WEMOS D1 MINI, HLK-PM01 and WS2812B. Its parts include 1 IC and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
3
WEMOS D1 MINI
A mini wifi board with 4MB flash based on ESP-8266EX, hardware version 4.0.0.LolinUncategorised
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x03_Male | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | HUMID, MOTION, NEOPIXEL, TEMP |
| 3 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | GND, PWR, SIG |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | 1000uF |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 10K |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 4K7 |
| 1 | CP | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | 1000uF |
| 1 | Conn_01x02_Male | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | LIGHT |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | 5v PWR 3v3 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | LOGO | neopixel_pcb:sensor_logo_small | G*** |
| 1 | LOGO | neopixel_pcb:sensor_logo_large | G*** |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | L power N |
| 1 | Thermistor | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | thermal fuse |
| 1 | WS2812B | neopixel_pcb:neopixel_pcb | D1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
| 1 | fuse 250V 2A | neopixel_pcb:slow blow fuse | fuse |
Questions
How big is the Powered multisensor PCB?
It measures 48.3 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Powered multisensor use?
21 parts, built around the WEMOS D1 MINI, HLK-PM01 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Powered multisensor KiCad files?
From the ChefsSlaad/PCBs_and_Micropython repository on GitHub, at the commit this page was made from: the board is pcbs/powered multisensor/powered multisensor.kicad_pcb and its schematic pcbs/door_relay_sensor/door_relay_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Powered multisensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask ChefsSlaad before reusing the design.
More from ChefsSlaad/PCBs_and_Micropython
10- 2 layers73.7 × 73.7 mm
Double relay
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
24 parts - 2 layers116.8 × 83.8 mm
Double relay v2
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
22 parts - 2 layers68.6 × 68.6 mm
Door relay sensor
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
20 parts - 2 layers73.7 × 73.7 mm
Rgb controller
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
20 parts - 2 layers39.6 × 49.8 mm
Multisensor
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
19 parts - 2 layers89.1 × 89.3 mm
Tree lights
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
19 parts - 2 layers68.6 × 68.6 mm
Relay 12v
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
13 parts - 2 layers27.9 × 76.2 mm
Esp8266-expansion board
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
12 parts - 2 layers82 × 27 mm
Robo car front shield
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
9 parts
Similar boards
- 2 layers78.7 × 58.4 mm
- 2 layers
IoT ESP switch relay
AdharTechnologies/ESP8266_D1_MINI_IoT_switch
kindly read this blog for full understanding: https://docs.google.com/document/d/e/2PACX-1vSAi6zmGvRynDwEvqRe5kNtlbvMZqgKHYD9E6emAaTxG17WCHXLFxFSK3p-E7R5uc0UGJ3i0j8vB/pub
8 partsMIT - 2 layers99.5 × 74 mm
- 2 layers76 × 66 mm
Radiator controller
Plokkke/sauter-marapi-esphome
ESPHome / Home Assistant pilot wire (fil pilote) controller for the Sauter Marapi tactile towel radiator — KiCad PCB, reverse engineering notes. Study phase, untested.
19 parts - 2 layers100 × 100 mm
Gate controller v1.1
walterwhiteita/esp8266-mqtt-gate-controller
Welcome to the ESPGate repository! This project offers a comprehensive retrofit solution tailored to upgrade a variety of gate control boards.
50 partsGPL-3.0 - 2 layers70 × 70 mm
AirSensor display
MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)
30 parts8 - 2 layers141 × 56.9 mm
- 2 layers141 × 56.9 mm
