2 layers82 × 100 mm
Robo car
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
36 parts
2 layers73.7 × 73.7 mm
Rgb controller
ChefsSlaad/PCBs_and_Micropythonstoring custom pcbs and micropython code for home projects
- Size
- 73.7 × 73.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 26
- Pads
- 65
- Tracks, vias
- 69, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Oct 2024
- Updated
- 21 Dec 2024
Overview
Rgb controller is an open-source printed circuit board by ChefsSlaad, from the ChefsSlaad/PCBs_and_Micropython repository on GitHub. It is a 2-layer board of 73.7 × 73.7 mm with 20 parts on 26 nets, routed with 69 tracks and 0 vias.
It is built around the WEMOS D1 MINI and IRLZ44N. Its parts include 8 resistors, 4 transistors, 3 connectors and 2 ICs. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
2Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R4, R6, R8 |
| 4 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7 |
| 4 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | RGBW_connector | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | PowerIn1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
| 1 | mini-360 | mini360:buck_converter 16.8x22,14 | U2 |
| 1 | power_select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | sensor | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2 |
More from ChefsSlaad/PCBs_and_Micropython
10- 2 layers73.7 × 73.7 mm
Double relay
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
24 parts - 2 layers116.8 × 83.8 mm
Double relay v2
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
22 parts - 2 layers48.3 × 68.6 mm
Powered multisensor
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
21 parts - 2 layers68.6 × 68.6 mm
Door relay sensor
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
20 parts - 2 layers39.6 × 49.8 mm
Multisensor
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
19 parts - 2 layers89.1 × 89.3 mm
Tree lights
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
19 parts - 2 layers68.6 × 68.6 mm
Relay 12v
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
13 parts - 2 layers27.9 × 76.2 mm
Esp8266-expansion board
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
12 parts - 2 layers82 × 27 mm
Robo car front shield
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
9 parts
Similar boards
- 2 layers60 × 40 mm
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
Questions
How big is the Rgb controller PCB?
It measures 73.7 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rgb controller use?
20 parts, built around the WEMOS D1 MINI and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rgb controller KiCad files?
From the ChefsSlaad/PCBs_and_Micropython repository on GitHub, at the commit this page was made from: the board is pcbs/rgb_strip_controller/rgb_controller.kicad_pcb and its schematic pcbs/door_relay_sensor/door_relay_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rgb controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask ChefsSlaad before reusing the design.