2 layers95 × 95 mm
Base controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
41 partsEPL-2.0
2 layers95 × 65 mm
Base controller
cgbriggs99/InstrumentControllerController for an instrument panel. Interfaces with MSFS.
- Size
- 95 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 43
- Pads
- 111
- Tracks, vias
- 134, 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Jul 2023
- Updated
- 7 Jul 2024
Overview
Base controller is an open-source printed circuit board by cgbriggs99, from the cgbriggs99/InstrumentController repository on GitHub, published under the EPL-2.0 licence. It is a 2-layer board of 95 × 65 mm with 27 parts on 43 nets, routed with 134 tracks and 3 vias.
It is built around the ESP32-WROOM-32. Its parts include 8 resistors, 6 connectors, 5 diodes, 2 capacitors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdInstrumentController
Controller for an instrument panel. Interfaces with MSFS.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4.7 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7, R8 |
| 5 | DIODE | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 2 | 10 K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1 K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 3V3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | 5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | DEV_CLASS | Button_Switch_THT:SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | INPUT | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | OUTPUT | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | POWER_IN | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
The 23 most common of 27 parts.
Questions
How big is the Base controller PCB?
It measures 95 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base controller use?
27 parts, built around the ESP32-WROOM-32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base controller KiCad files?
From the cgbriggs99/InstrumentController repository on GitHub, at the commit this page was made from: the board is circuits/base_controller/base_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base controller design in my own project?
Its repository publishes it under the EPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from cgbriggs99/InstrumentController
5- 2 layers50 × 50 mm
X27 controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
19 partsEPL-2.0 - 2 layers50 × 50 mm
28byj controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
18 partsEPL-2.0 - 2 layers50 × 50 mm
28byj controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
17 partsEPL-2.0 - 2 layers50 × 50 mm
X27 controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
12 partsEPL-2.0
Similar boards
- 2 layers24.1 × 36.2 mm
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0 - 4 layers99.6 × 76.2 mm
- 4 layers46.8 × 34.8 mm
SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 2 layers90 × 76.5 mm
- 2 layers57.2 × 35.1 mm
- 2 layers85 × 56 mm
- 2 layers
Smp7c
likeablob/slow-movie-player-7c
Yet another "Slow Movie Player" implementation with 7-color E-Paper module and ESP32.
18 parts51MIT - 2 layers30.8 × 24.4 mm
Wii Bluetooth Replacement
JSnowden33/Wii-Bluetooth-Replacement
This project is a full replacement for the Nintendo Wii's Bluetooth module. Emulation of the Bluetooth module is performed on the PIC32 based on rnconrad's emulator, while controller connectivity on the ESP32 is based…
50 parts48GPL-3.0