2 layers83 × 29 mm
2 layers90 × 76.5 mm
LCDZapperPro
charcole/LCDZapper163Device for making light gun games playable on LCD TVs
- Size
- 90 × 76.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 108
- Pads
- 392
- Tracks, vias
- 1,175, 106
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Aug 2016
- Updated
- 12 Aug 2020
Overview
LCDZapperPro is an open-source printed circuit board by charcole, from the charcole/LCDZapper repository on GitHub. It is a 2-layer board of 90 × 76.5 mm with 126 parts on 108 nets, routed with 1,175 tracks and 106 vias.
It is built around the ESP32-WROOM-32, 74LCX08M and 74LV32DB, with the AMS1117-3.3 and TS3022IST among its other parts. Its parts include 50 resistors, 22 diodes, 16 capacitors, 9 connectors and 7 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
5
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
74LCX08M
SOIC-14-40℃~+85℃ 1.7V、2V 1.8V、2.2V 10uA 2 24mA 24mA 2V~3.6V 4 400mV、550mV、600mV 5.5ns@3.3V,50pF 700mV、800mV 74LCX AND Gate Overvoltage-tolerant input、Local shutdown mode SOIC-14 Logic Gates ROHSonsemiGates
74LV32DB
-- Logic Gates ROHSNXP SemiconductorsLogic Gates
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TS3022IST
MSOP-8-40℃~+125℃ 1nA 2 2V~5V 38ns 3uV/℃ 500uV 73uA 79dB 86nA CMOS Push-pull Rail-to-rail input MSOP-8 Comparators ROHSSTMicroelectronicsComparators
README
README.mdLightGunVerter
Device for making lightgun games playable on modern LCD TVs with original hardware. For example NES Duck Hunt but the system will work with almost all lightgun games/systems from the NES all the way up to the Dreamcast.
For latest information and purchasing information please visit www.lightgunverter.com.
Instructions for use can be found here
There's a discussion thread (Issue: General Discussion) or a thread about building your own if you want to ask any questions.
Everything is open source but cannot be used for commercial purposes (ie. you can make your own but you can't make them and sell them). See LICENSE for more details.
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | D_Schottky | Diodes_SMD:D_SOT-23_ANK_HandSoldering | D1, D3, D4, D5, D6, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D22 +3 |
| 14 | 10K | Resistors_SMD:R_1206_HandSoldering | R4, R7, R26, R27, R37, R38, R42, R43, R44, R45, R46, R47, R53, R54 |
| 4 | 0.1u | Capacitors_SMD:C_1206_HandSoldering | C4, C5, C9, C11 |
| 4 | 100 | Resistors_SMD:R_1206_HandSoldering | R13, R17, R21, R25 |
| 4 | 1u | Capacitors_SMD:C_1206_HandSoldering | C3, C10, C13, C18 |
| 4 | 2.2K | Resistors_SMD:R_1206_HandSoldering | R18, R22, R28, R30 |
| 4 | 2N7002 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4 |
| 3 | 1K | Resistors_SMD:R_1206_HandSoldering | R8, R9, R29 |
| 3 | 330 | Resistors_SMD:R_1206_HandSoldering | R6, R32, R35 |
| 3 | 75 | Resistors_SMD:R_1206_HandSoldering | R3, R11, R31 |
| 2 | 12K | Resistors_SMD:R_1206_HandSoldering | R2, R5 |
| 2 | 220 | Resistors_SMD:R_1206_HandSoldering | R19, R20 |
| 2 | 220p | Capacitors_SMD:C_1206_HandSoldering | C12, C14 |
| 2 | 220u | Capacitors_THT:CP_Radial_D7.5mm_P2.50mm | C1, C2 |
| 2 | 330K | Resistors_SMD:R_1206_HandSoldering | R39, R40 |
| 2 | 470 | Resistors_SMD:R_1206_HandSoldering | R1, R16 |
| 2 | 5.6K | Resistors_SMD:R_1206_HandSoldering | R10, R14 |
| 2 | 5.6n | Capacitors_SMD:C_1206_HandSoldering | C6, C7 |
| 2 | 560 | Resistors_SMD:R_1206_HandSoldering | R24, R34 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5, J10 |
| 2 | D_TVS_x2_AAC | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D20, D21 |
| 2 | RJ45_LEDS | Connectors:RJ45_8_LED | J6, J7 |
| 1 | 0 | Resistors_SMD:R_1206_HandSoldering | R55 |
| 1 | 220u | Capacitors_SMD:C_1206_HandSoldering | C8 |
| 1 | 270 | Resistors_SMD:R_1206_HandSoldering | R23 |
| 1 | 33 | Resistors_SMD:R_1206_HandSoldering | R12 |
| 1 | 39 | Resistors_SMD:R_1206_HandSoldering | R36 |
| 1 | 47 | Resistors_SMD:R_1206_HandSoldering | R33 |
| 1 | 470n | Capacitors_SMD:C_1206_HandSoldering | C15 |
| 1 | 56K | Resistors_SMD:R_1206_HandSoldering | R41 |
| 1 | 68 | Resistors_SMD:R_1206_HandSoldering | R15 |
| 1 | 74LCX08 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm_HandSoldering | U5 |
| 1 | 74LV06 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm_HandSoldering | U7 |
| 1 | 74LV32 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm_HandSoldering | U6 |
| 1 | AMS1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | CLC2007 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm_HandSoldering | U3 |
| 1 | CSyncIn | rca_switch_footprint:rca_yellow | J4 |
| 1 | ESP32-WROOM | ESP32-footprints-Lib:ESP32-WROOM | U2 |
| 1 | LED | LEDs:LED_1206_HandSoldering | D2 |
| 1 | LOGO | KiCad:LightGunVerterLogoLarge | G*** |
| 1 | PROGRAM | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J1 |
| 1 | PROG_SW | Buttons_Switches_SMD:SW_SPST_EVQPE1 | SW2 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | TEST_3.3 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP2 |
| 1 | TEST_5V | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1 |
| 1 | TEST_CIN | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP15 |
| 1 | TEST_CSYNC | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP17 |
| 1 | TEST_DIM | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP6 |
| 1 | TEST_DIM2 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP4 |
| 1 | TEST_SEL1 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP9 |
| 1 | TEST_SEL2 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP10 |
| 1 | TEST_TRIG1 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP13 |
| 1 | TEST_TRIG2 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP14 |
| 1 | TEST_VDIM | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP5 |
| 1 | TEST_VIN | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP3 |
| 1 | TEST_VOUT | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP7 |
| 1 | TEST_WHITE | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP12 |
| 1 | TS3022 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm_HandSoldering | U4 |
| 1 | USB_B | Connectors:USB_Mini-B | J2 |
| 1 | VIDEO_IN | RCAJack:rca_yellow | J3 |
| 1 | VIDEO_OUT | RCAJack:rca_yellow | J9 |
The 125 most common of 126 parts.
Questions
How big is the LCDZapperPro PCB?
It measures 90 × 76.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LCDZapperPro use?
126 parts, built around the ESP32-WROOM-32, 74LCX08M, 74LV32DB and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LCDZapperPro KiCad files?
From the charcole/LCDZapper repository on GitHub, at the commit this page was made from: the board is KiCad/LCDZapperPro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LCDZapperPro design in my own project?
Its repository states no licence, so its author keeps all rights: ask charcole before reusing the design.
More from charcole/LCDZapper
2- 2 layers29.8 × 87 mm
Similar boards
- 2 layers100 × 45 mm
Basic mc6800
rabid-inventor/mc68xx-boards
collection of PCB's based around the Motorola MC6800 series processor
32 parts3MIT - 4 layers140 × 110 mm
- 2 layers85 × 56 mm
- 2 layers62.2 × 30.5 mm
WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44 - 2 layers150 × 50 mm
- 2 layers40 × 68 mm
MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 2 layers259.5 × 60.7 mm
1512hh control
larryqiann/AP1512HH-ESP32
Coway AP1512HH Main Board replacement with ESP32
71 parts29CERN-OHL-P-2.0 - 2 layers64.6 × 87.1 mm
