Skip to the content
2 layers29.8 × 87 mmSCARTBreakout, the printed circuit board in 3D

Device for making light gun games playable on LCD TVs

Size
29.8 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
23
Pads
58
Tracks, vias
68, 2
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
29 Aug 2016
Updated
12 Aug 2020

Overview

SCARTBreakout is an open-source printed circuit board by charcole, from the charcole/LCDZapper repository on GitHub. It is a 2-layer board of 29.8 × 87 mm with 6 parts on 23 nets, routed with 68 tracks and 2 vias.

It belongs with the lEDs and displays boards of this library.

README

README.md

LightGunVerter

Device for making lightgun games playable on modern LCD TVs with original hardware. For example NES Duck Hunt but the system will work with almost all lightgun games/systems from the NES all the way up to the Dreamcast.

For latest information and purchasing information please visit www.lightgunverter.com.

Instructions for use can be found here

There's a discussion thread (Issue: General Discussion) or a thread about building your own if you want to ask any questions.

Everything is open source but cannot be used for commercial purposes (ie. you can make your own but you can't make them and sell them). See LICENSE for more details.

Parts

6
QtyValueFootprintReferences
1CSYNC_OUTrca_switch_footprint:rca_yellowJ1
1CSYNC_TVrca_switch_footprint:rca_yellowJ2
1GREEN_OUTrca_switch_footprint:rca_yellowJ5
1GREEN_TVrca_switch_footprint:rca_yellowJ6
1SCART_INw_conn_av:SCARTJ3
1SCART_TVw_conn_av:SCARTJ4

More from charcole/LCDZapper

2
  • 2 layers90 × 76.5 mmLCDZapperPro, the printed circuit board in 3D

    LCDZapperPro

    charcole/LCDZapper

    Device for making light gun games playable on LCD TVs

    126 parts163
  • 2 layers83 × 29 mmFrontPanel, the printed circuit board in 3D

    FrontPanel

    charcole/LCDZapper

    Device for making light gun games playable on LCD TVs

    15 parts163

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the SCARTBreakout PCB?

It measures 29.8 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SCARTBreakout use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SCARTBreakout KiCad files?

From the charcole/LCDZapper repository on GitHub, at the commit this page was made from: the board is KiCad/SCARTBreakout/SCARTBreakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SCARTBreakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask charcole before reusing the design.