
Base controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.

Controller for an instrument panel. Interfaces with MSFS.
28byj controller is an open-source printed circuit board by cgbriggs99, from the cgbriggs99/InstrumentController repository on GitHub, published under the EPL-2.0 licence. It is a 2-layer board of 50 × 50 mm with 17 parts on 24 nets, routed with 136 tracks and 5 vias.
It is built around the 74HC595 and ULN2803A. Its parts include 6 resistors, 2 ICs, 2 connectors and 1 capacitor.
Controller for an instrument panel. Interfaces with MSFS.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 2 | 28BYJ-48_Stepper | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | M1, M2 |
| 1 | 10 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | 74HC595 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | INPUT | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U2 |
The 13 most common of 17 parts.

cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.

cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.

cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.

cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.

cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.

OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters




niteshkadyan/Hearty-LED-Necklace-Badge
Kicad project files and Android app for the Hearty LED wearable necklace cum badge

julianschick/flipdot-brose
Microcontroller code (ESP32) and Circuit Design for controlling Brose Flipdot Modules.

LudovicLemarinel/EspHomeAutomation
Home Automation based on ESP8266 and MQTT

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the 74HC595 and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cgbriggs99/InstrumentController repository on GitHub, at the commit this page was made from: the board is circuits/28byj_controller/28byj_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the EPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).