2 layers95 × 95 mm
Base controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
41 partsEPL-2.0
2 layers50 × 50 mm
X27 controller
cgbriggs99/InstrumentControllerController for an instrument panel. Interfaces with MSFS.
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 6
- Pads
- 28
- Tracks, vias
- 41, 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Jul 2023
- Updated
- 7 Jul 2024
Overview
X27 controller is an open-source printed circuit board by cgbriggs99, from the cgbriggs99/InstrumentController repository on GitHub, published under the EPL-2.0 licence. It is a 2-layer board of 50 × 50 mm with 12 parts on 6 nets, routed with 41 tracks and 3 vias.
Its parts include 4 resistors, 2 connectors and 1 capacitor.
README
README.mdInstrumentController
Controller for an instrument panel. Interfaces with MSFS.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10 K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 1 | 10 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 5 V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | x27_Stepper | Motors:Motor_x27-166 | M1 |
The 8 most common of 12 parts.
Questions
How big is the X27 controller PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the X27 controller use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the X27 controller KiCad files?
From the cgbriggs99/InstrumentController repository on GitHub, at the commit this page was made from: the board is circuits/x27_controller_proto/x27_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the X27 controller design in my own project?
Its repository publishes it under the EPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from cgbriggs99/InstrumentController
5- 2 layers95 × 65 mm
Base controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
27 partsEPL-2.0 - 2 layers50 × 50 mm
X27 controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
19 partsEPL-2.0 - 2 layers50 × 50 mm
28byj controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
18 partsEPL-2.0 - 2 layers50 × 50 mm
28byj controller
cgbriggs99/InstrumentController
Controller for an instrument panel. Interfaces with MSFS.
17 partsEPL-2.0
Similar boards
- 2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696