2 layers118.1 × 74.9 mm
LED Dimmer
settinger/LED-command-center
KiCad repo for my first ever panel-mount project
82 partsBSD-3-Clause
2 layers80 × 75 mm
Planta control
cesar191/diseno_PCBdiseño de una pcb de control el cual puede tener diferentes estructuras
- Size
- 80 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 73
- Pads
- 207
- Tracks, vias
- 379, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 3 Aug 2025
- Updated
- 4 Nov 2026
Overview
Planta control is an open-source printed circuit board by cesar191, from the cesar191/diseno_PCB repository on GitHub. It is a 2-layer board of 80 × 75 mm with 55 parts on 73 nets, routed with 379 tracks and 15 vias.
It is built around the DS18B20, DS18B20Z and LM358, with the 1N4148WS, MMBT3904 and TIP31C among its other parts. Its parts include 13 resistors, 8 diodes, 7 connectors, 5 ICs and 2 transistors.
Main components
6
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
DS18B20Z
SOIC-8-55℃~+125℃ 12bit 2.5V~5.5V 750ms Single-bus ±0.4℃ SOIC-8 Temperature Sensors ROHSUMWTemperature Sensors
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
TIP31C
TO-220-65℃~+150℃ 1 NPN 1.2V 10 100V 300uA 3A 40W 5V NPN TO-220 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 150 | Resistor_SMD:R_0805_2012Metric | R2, R3, R6, R7, R12, R13 |
| 6 | 1N4148WS | Diode_SMD:D_SOD-323 | D1, D2, D5, D6, D7, D8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 2 | 1 | Resistor_SMD:R_2512_6332Metric | R4, R5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x15_Pin | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J3 |
| 2 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U3, U4 |
| 2 | DS18B20Z | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D3, D4 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | TIP31C | Package_TO_SOT_THT:TO-220-3_Vertical | T1, T2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7nf | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LOGO | Library:logoUsco | G*** |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J2 |
| 1 | V_corriente_filtro_Q1 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP5 |
| 1 | V_corriente_filtro_Q2 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP6 |
| 1 | pwm_q1 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1 |
| 1 | pwm_q2 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2 |
| 1 | temperatura1_bit | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP10 |
| 1 | temperatura2_bit | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP11 |
| 1 | tension_3V3 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP8 |
| 1 | tension_5V | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP7 |
| 1 | tension_Vin_esp | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP9 |
| 1 | ventilador1 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP12 |
| 1 | ventilador2 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP13 |
Questions
How big is the Planta control PCB?
It measures 80 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Planta control use?
55 parts, built around the DS18B20, DS18B20Z, LM358 and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Planta control KiCad files?
From the cesar191/diseno_PCB repository on GitHub, at the commit this page was made from: the board is planta_control.kicad_pcb and its schematic .history/planta_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Planta control design in my own project?
Its repository states no licence, so its author keeps all rights: ask cesar191 before reusing the design.
Similar boards
- 2 layers99.9 × 73.7 mm
Incubator bottom
Hackuarium/simple-incubator
The goal is to create a simple controller of temperature for an incubator.
57 parts - 2 layers100 × 50 mm
Wiscale
makerspacelt/wiscale-hw
This is ESP8266 (ESP-12F) and HX711 based weight monitoring device.
118 parts - 2 layers100 × 40 mm
- 2 layers96 × 70 mm
- 4 layers313.1 × 185.6 mm
- 2 layers96.5 × 94 mm
Linear supply
anshu-patra/pcb_design
a linear voltage power supply which takes in 220v and 50hz ac as input and converts it into a linera voltage power supply of 5V and 2A stable supply and also contains a foldback short circuit protection
21 partsMIT - 2 layers209 × 139.5 mm
PEH PCB
jodhsinghnahal/piezo_matlab
Simulation, circuit and PCB design repository for investigating piezoelectric energy harvesting (PEH) interfaces under conventional vibration excitation and underwater acoustic excitation.
27 parts