2 layers75 × 40 mm
Mood
taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.
91 parts
2 layers100 × 40 mm
Greenhouse doc
taseraul/greenhouse-doc- Size
- 100 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 60
- Pads
- 160
- Tracks, vias
- 202, 56
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Jan 2023
- Updated
- 31 Oct 2024
Overview
Greenhouse doc is an open-source printed circuit board by taseraul, from the taseraul/greenhouse-doc repository on GitHub. It is a 2-layer board of 100 × 40 mm with 39 parts on 60 nets, routed with 202 tracks and 56 vias.
It is built around the ESP32-WROOM-32, DS18B20 and DS18B20Z, with the SC810ULTRT, ADW1203HLW and BH-18650-PC among its other parts. Its parts include 11 capacitors, 11 resistors, 5 ICs, 3 connectors and 3 switches. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
DS18B20Z
SOIC-8-55℃~+125℃ 12bit 2.5V~5.5V 750ms Single-bus ±0.4℃ SOIC-8 Temperature Sensors ROHSUMWTemperature Sensors
SC810ULTRT
MLPD-6-UT(2x2)1 1A MLPD-6-UT(2x2) Battery Management ROHSSEMTECHBattery Management
ADW1203HLW
插件-40℃~+85℃ 1 Set Normally Open: 1A (SPST NO) 15ms 15ms 16A 277V@AC 3V AgSnO2 Dual Coil 插件 Magnetic Latching Relays ROHSPanasonicMagnetic Latching Relays
BH-18650-PC
--40℃~+180℃ 18650 Battery holder - Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorJS102000SAQN
SMD-40℃~+85℃ 0.7mm 15,000 cycles 4.7mm 5V 6.7mm Black PC Pin Rectangular Columnar SPDT Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide Switches
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R6, R7, R10, R11 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C11 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C4, C6, C7 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 1.5u | Inductor_SMD:L_Wuerth_MAPI-4020 | L1 |
| 1 | 120k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 56p | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | ADW1203HLW | SamacSys_Parts:ADW1203HLW | K1 |
| 1 | BH-18650-PC | SamacSys_Parts:BH18650PC | BT1 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | DS18B20Z | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | JS102000SAQN | SamacSys_Parts:JS102000SAQN | S1 |
| 1 | SC810ULTRT | SamacSys_Parts:SON50P200X200X60-7N-D | IC1 |
| 1 | SW_SPST | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | TPS564247DRLR | SamacSys_Parts:SOT50P160X60-6N | IC2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 2 layers12 × 20 mm
- 4 layers61 × 42 mm
- 2 layers80 × 75 mm
Planta control
cesar191/diseno_PCB
diseño de una pcb de control el cual puede tener diferentes estructuras
55 parts - 2 layers99.9 × 73.7 mm
Incubator bottom
Hackuarium/simple-incubator
The goal is to create a simple controller of temperature for an incubator.
57 parts - 2 layers100 × 50 mm
Wiscale
makerspacelt/wiscale-hw
This is ESP8266 (ESP-12F) and HX711 based weight monitoring device.
118 parts - 4 layers104 × 144 mm
WQ PCB
332753-art/Water_Quality_Monitoring
portable Water Quality Monitoring System for Live Fish Transport
78 partsApache-2.0 - 2 layers105.7 × 107.5 mm
NomobotSK
edantoni96/NomobotSK
NomobotSK is a educational robot for kids to learn programming and robotics.
74 parts
Questions
How big is the Greenhouse doc PCB?
It measures 100 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Greenhouse doc use?
39 parts, built around the ESP32-WROOM-32, DS18B20, DS18B20Z and SC810ULTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Greenhouse doc KiCad files?
From the taseraul/greenhouse-doc repository on GitHub, at the commit this page was made from: the board is hardware/greenhouse-doc.kicad_pcb and its schematic hardware/greenhouse-doc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Greenhouse doc design in my own project?
Its repository states no licence, so its author keeps all rights: ask taseraul before reusing the design.